MAX16812ATI+T

Analog Devices / Maxim Integrated
700-MAX16812ATIT
MAX16812ATI+T

Nsx:

Mô tả:
LED Lighting Driver ICs Integrated High-Voltage LED Driver with

Mô hình ECAD:
Tải xuống Thư viện Tải miễn phí để chuyển đổi tệp tin này cho Công cụ ECAD của bạn. Tìm hiểu thêm về Mô hình ECAD.

Sẵn có

Tồn kho:
Không Lưu kho
Thời gian sản xuất của nhà máy:
10 Tuần Thời gian sản xuất tại nhà máy dự kiến.
Tối thiểu: 2500   Nhiều: 2500
Đơn giá:
$-.--
Thành tiền:
$-.--
Dự kiến Thuế quan:
Sản phẩm này được Vận chuyển MIỄN PHÍ

Giá (USD)

Số lượng Đơn giá
Thành tiền
Toàn bộ Cuộn (Đơn hàng theo bội số của 2500)
$5.60 $14,000.00

Bao bì thay thế

Nsx Mã Phụ tùng:
Đóng gói:
Tube
Sẵn có:
Có hàng
Giá:
$9.55
Tối thiểu:
1

Sản phẩm Tương tự

Analog Devices / Maxim Integrated MAX16812ATI+
Analog Devices / Maxim Integrated
LED Lighting Driver ICs Integrated High-Voltage LED Driver with

Đặc tính Sản phẩm Thuộc tính giá trị Chọn thuộc tính
Analog Devices Inc.
Danh mục Sản phẩm: IC bộ điều khiển chiếu sáng đèn LED
RoHS:  
1 Output
TQFN-28
76 V
5.5 V
MAX16812
- 40 C
+ 125 C
Brightness Control/Dimming
Reel
Nhãn hiệu: Analog Devices / Maxim Integrated
Quốc gia Hội nghị: Not Available
Quốc gia phân phối: Not Available
Quốc gia xuất xứ: TH
Làm mờ: Analog, PWM
Dòng đầu ra mức cao: 300 uA
Điện áp đầu vào: 5.5 V to 76 V
Dòng đầu ra mức thấp: 80 uA
Kiểu gắn: SMD/SMT
Số lượng kênh: 1 Channel
Pd - Tiêu tán nguồn: 2.759 W
Loại sản phẩm: LED Lighting Drivers
Số lượng Kiện Gốc: 2500
Danh mục phụ: Driver ICs
Mã Bí danh: MAX16812
Đã tìm thấy các sản phẩm:
Để hiển thị sản phẩm tương tự, hãy chọn ít nhất một ô
Chọn ít nhất một hộp kiểm ở trên để hiển thị các sản phẩm tương tự trong danh mục này.
Các thuộc tính đã chọn: 0

CNHTS:
8542319000
CAHTS:
8542390000
USHTS:
8542390070
KRHTS:
8542311000
TARIC:
8542319000
MXHTS:
8542399999
ECCN:
EAR99

IS32LT3175N/P Single-Channel Linear LED Drivers

ISSI IS32LT3175N/P Single-Channel Linear LED Drivers come with fade in/out and PWM dimming. The regulators serve as a stand-alone LED driver-configurable from 20mA to 150mA with external resistors, no microcontroller is necessary. A logic level “courtesy light” signal from the PWM pin can be interfaced to precisely drive the LED channel. The IS32LT3175P obtains a positive polarity PWM signal. In addition, the IS32LT3175N obtains a negative polarity PWM signal. The regulator integrates a 63-step fade-in and fades out the algorithm (Gamma correction). This causes the output LED current to increasingly rise up to the full source value after the EN pin is pulsed.

Optical ADI SLP