PI3EQX1002EZREX

Diodes Incorporated
621-PI3EQX1002EZREX
PI3EQX1002EZREX

Nsx:

Mô tả:
Interface - Signal Buffers, Repeaters USB3 Eqx W-QFN2525-24 T&R 3.5K

Mô hình ECAD:
Tải xuống Thư viện Tải miễn phí để chuyển đổi tệp tin này cho Công cụ ECAD của bạn. Tìm hiểu thêm về Mô hình ECAD.

Có hàng: 894

Tồn kho:
894 Có thể Giao hàng Ngay
Thời gian sản xuất của nhà máy:
30 Tuần Thời gian sản xuất tại nhà máy dự kiến để có số lượng lớn hơn mức hiển thị.
Thời gian giao hàng lâu được báo cáo trên sản phẩm này.
Tối thiểu: 1   Nhiều: 1
Đơn giá:
$-.--
Thành tiền:
$-.--
Dự kiến Thuế quan:
Đóng gói:
Toàn bộ Cuộn (Đơn hàng theo bội số của 3500)

Giá (USD)

Số lượng Đơn giá
Thành tiền
Cut Tape / MouseReel™
$1.67 $1.67
$1.23 $12.30
$1.12 $28.00
$0.99 $99.00
$0.932 $233.00
$0.897 $448.50
$0.867 $867.00
Toàn bộ Cuộn (Đơn hàng theo bội số của 3500)
$0.827 $2,894.50
$0.81 $5,670.00
† $7.00 Phí MouserReel™ sẽ được thêm và tính vào giỏ hàng của bạn. Không thể hủy và gửi trả tất cả đơn hàng MouseReel™.

Đặc tính Sản phẩm Thuộc tính giá trị Chọn thuộc tính
Diodes Incorporated
Danh mục Sản phẩm: Giao diện - Bộ đệm tín hiệu, Bộ chuyển tiếp
RoHS:  
Redrivers
I2C, USB
3.6 V
3 V
SMD/SMT
TQFN-24
Reel
Cut Tape
MouseReel
Nhãn hiệu: Diodes Incorporated
Quốc gia Hội nghị: Not Available
Quốc gia phân phối: Not Available
Quốc gia xuất xứ: TW
Tốc độ dữ liệu: 10 Gb/s
Điện áp cấp vận hành: 3.3 V
Loại sản phẩm: Signal Buffers, Repeaters
Sê-ri: PI3EQX10
Số lượng Kiện Gốc: 3500
Danh mục phụ: Interface ICs
Loại: Linear Redriver
Đã tìm thấy các sản phẩm:
Để hiển thị sản phẩm tương tự, hãy chọn ít nhất một ô
Chọn ít nhất một hộp kiểm ở trên để hiển thị các sản phẩm tương tự trong danh mục này.
Các thuộc tính đã chọn: 0

Chức năng này cần phải bật JavaScript.

CNHTS:
8542399000
USHTS:
8542390090
ECCN:
EAR99

PI3EQX1002E & PI3EQX1004E USB3.1 Gen-2 ReDrivers™

Diodes Incorporated PI3EQX1002E and PI3EQX1004E USB3.1 Gen-2 ReDrivers™ are low-power, high-performance, 1- and 2-port linear ReDrivers. The Diodes Incorporated PI3EQX1002E and PI3EQX1004E are designed for the USB 3.1 protocol. To optimize performance, the devices provide programmable equalization, swing, and flat gain. The devices support two 100Ω differential CML data I/Os between the protocol ASIC to a switch fabric, over cable, or to extend the signals across other distant data pathways on the user's platform.

USB 3.1 ReDrivers

Diodes Incorporated USB 3.1 ReDrivers regenerate signals to boost the signal quality of high-speed interfaces. These USB 3.1 ReDrivers/Repeaters help consumer electronics interconnect to achieve a maximum transmission speed of 10Gbps with full-duplex capabilities. These ReDrivers use equalization, pre-emphasis, and other technologies to adjust and correct known channel losses at the transmitter and restore signal integrity at the receiver. This results in an eye pattern at the receiver with the margins required to deliver reliable communications with low Bit Error Rates (BER).