MCS1806GS-3-40-P

Monolithic Power Systems (MPS)
946-MCS1806GS-3-40-P
MCS1806GS-3-40-P

Nsx:

Mô tả:
Board Mount Current Sensors 3.3V Hall current sensor. 2.5% accuracy. 3kV Isolation

Mô hình ECAD:
Tải xuống Thư viện Tải miễn phí để chuyển đổi tệp tin này cho Công cụ ECAD của bạn. Tìm hiểu thêm về Mô hình ECAD.

Có hàng: 2,453

Tồn kho:
2,453 Có thể Giao hàng Ngay
Thời gian sản xuất của nhà máy:
22 Tuần Thời gian sản xuất tại nhà máy dự kiến để có số lượng lớn hơn mức hiển thị.
Tối thiểu: 1   Nhiều: 1
Đơn giá:
$-.--
Thành tiền:
$-.--
Dự kiến Thuế quan:

Giá (USD)

Số lượng Đơn giá
Thành tiền
$3.43 $3.43
$3.02 $15.10
$2.87 $28.70
$2.70 $67.50
$2.58 $129.00
$2.47 $247.00
Toàn bộ Cuộn (Đơn hàng theo bội số của 500)
$2.35 $1,175.00
$2.23 $2,230.00
$2.17 $5,425.00

Đặc tính Sản phẩm Thuộc tính giá trị Chọn thuộc tính
Monolithic Power Systems (MPS)
Danh mục Sản phẩm: Cảm biến dòng gắn bo mạch
RoHS:  
40 A
Current Sense
5 us
2.5 %
100 kHz
3.3 V
Analog
Nhãn hiệu: Monolithic Power Systems (MPS)
Quốc gia Hội nghị: Not Available
Quốc gia phân phối: Not Available
Quốc gia xuất xứ: CN
Chiều dài: 5 mm
Nhiệt độ làm việc tối đa: + 125 C
Nhiệt độ làm việc tối thiểu: - 40 C
Đóng gói / Vỏ bọc: SOIC-8
Đóng gói: Reel
Đóng gói: Cut Tape
Loại sản phẩm: Board Mount Current Sensors
Sê-ri: MCS1806
Số lượng Kiện Gốc: 500
Danh mục phụ: Sensors
Điện áp cấp nguồn - Tối đa: 3.6 V
Điện áp cấp nguồn - Tối thiểu: 3 V
Loại: Isolated Hall-Effect
Chiều rộng: 4 mm
Đã tìm thấy các sản phẩm:
Để hiển thị sản phẩm tương tự, hãy chọn ít nhất một ô
Chọn ít nhất một hộp kiểm ở trên để hiển thị các sản phẩm tương tự trong danh mục này.
Các thuộc tính đã chọn: 0

CNHTS:
8542399000
CAHTS:
8542390000
USHTS:
8542390090
MXHTS:
8542399999
ECCN:
EAR99

MCS1806 Hall-effect Current Sensors

Monolithic Power Systems (MPS) MCS1806 Hall-effect Current Sensors are 3kVRMS isolated current sensors with 500VRMS working voltage and ±2.5% accuracy. These linear Hall-effect current sensors for AC or DC current sensing incorporate differential Hall arrays that cancel out any stray magnetic fields. The MCS1806 current sensors feature ±5A to ±50A bidirectional range, adjustable bandwidth up to 100kHz, and ratio-metric outputs from the supply voltages. These Hall-effect sensors are available in SOIC-8 packages, which are factory-trimmed for accuracy and offer no magnetic Hysteresis. The MCS1806 Hall-effect current sensors are ideally used in multi-phase inverters, motor controls, automotive systems, Switch-Mode Power Supplies (SMPSs), over-current fault protection, and load detection and management.