MP4056GS-P

Monolithic Power Systems (MPS)
946-MP4056GS-P
MP4056GS-P

Nsx:

Mô tả:
LED Lighting Driver ICs TRIAC Dimmable, Non-isolated Offline LED Controller with Active PFC

Mô hình ECAD:
Tải xuống Thư viện Tải miễn phí để chuyển đổi tệp tin này cho Công cụ ECAD của bạn. Tìm hiểu thêm về Mô hình ECAD.

Sẵn có

Tồn kho:
Không Lưu kho
Thời gian sản xuất của nhà máy:
18 Tuần Thời gian sản xuất tại nhà máy dự kiến.
Tối thiểu: 1   Nhiều: 1
Đơn giá:
$-.--
Thành tiền:
$-.--
Dự kiến Thuế quan:

Giá (USD)

Số lượng Đơn giá
Thành tiền
$2.63 $2.63
$1.70 $17.00
$1.52 $38.00
$1.25 $125.00
$1.18 $295.00
Toàn bộ Cuộn (Đơn hàng theo bội số của 500)
$0.867 $433.50
$0.824 $824.00
$0.792 $1,980.00
$0.777 $3,885.00

Đặc tính Sản phẩm Thuộc tính giá trị Chọn thuộc tính
Monolithic Power Systems (MPS)
Danh mục Sản phẩm: IC bộ điều khiển chiếu sáng đèn LED
Buck-Boost
305 V
85 V
Reel
Cut Tape
Nhãn hiệu: Monolithic Power Systems (MPS)
Quốc gia Hội nghị: Not Available
Quốc gia phân phối: Not Available
Quốc gia xuất xứ: Not Available
Điện áp đầu vào: 85 VAC to 305 VAC
Nhạy với độ ẩm: Yes
Kiểu gắn: SMD/SMT
Sản phẩm: LED Lighting Drivers
Loại sản phẩm: LED Lighting Drivers
Số lượng Kiện Gốc: 500
Danh mục phụ: Driver ICs
Loại: Non-Isolated
Đã tìm thấy các sản phẩm:
Để hiển thị sản phẩm tương tự, hãy chọn ít nhất một ô
Chọn ít nhất một hộp kiểm ở trên để hiển thị các sản phẩm tương tự trong danh mục này.
Các thuộc tính đã chọn: 0

USHTS:
8542390090
TARIC:
8542399000
ECCN:
EAR99

IS32LT3175N/P Single-Channel Linear LED Drivers

ISSI IS32LT3175N/P Single-Channel Linear LED Drivers come with fade in/out and PWM dimming. The regulators serve as a stand-alone LED driver-configurable from 20mA to 150mA with external resistors, no microcontroller is necessary. A logic level “courtesy light” signal from the PWM pin can be interfaced to precisely drive the LED channel. The IS32LT3175P obtains a positive polarity PWM signal. In addition, the IS32LT3175N obtains a negative polarity PWM signal. The regulator integrates a 63-step fade-in and fades out the algorithm (Gamma correction). This causes the output LED current to increasingly rise up to the full source value after the EN pin is pulsed.