MP5026GLRT-Z

Monolithic Power Systems (MPS)
946-MP5026GLRT-Z
MP5026GLRT-Z

Nsx:

Mô tả:
Hot Swap Voltage Controllers 16V, 20A, 2.8mohm RDS(ON),Hot-Swap Intelli-Fuse Solution

Tuổi thọ:
Sản phẩm Mới:
Mới từ nhà sản xuất này.
Mô hình ECAD:
Tải xuống Thư viện Tải miễn phí để chuyển đổi tệp tin này cho Công cụ ECAD của bạn. Tìm hiểu thêm về Mô hình ECAD.

Có hàng: 2,497

Tồn kho:
2,497
Có thể Giao hàng Ngay
Đang đặt hàng:
5,000
Thời gian sản xuất của nhà máy:
14
Tuần Thời gian sản xuất tại nhà máy dự kiến để có số lượng lớn hơn mức hiển thị.
Tối thiểu: 1   Nhiều: 1
Đơn giá:
$-.--
Thành tiền:
$-.--
Dự kiến Thuế quan:
Đóng gói:
Toàn bộ Cuộn (Đơn hàng theo bội số của 5000)

Giá (USD)

Số lượng Đơn giá
Thành tiền
Cut Tape / MouseReel™
$3.54 $3.54
$2.33 $23.30
$2.16 $54.00
$1.88 $188.00
$1.76 $440.00
$1.54 $770.00
$1.28 $1,280.00
$1.21 $3,025.00
Toàn bộ Cuộn (Đơn hàng theo bội số của 5000)
$1.17 $5,850.00
† $7.00 Phí MouserReel™ sẽ được thêm và tính vào giỏ hàng của bạn. Không thể hủy và gửi trả tất cả đơn hàng MouseReel™.

Đặc tính Sản phẩm Thuộc tính giá trị Chọn thuộc tính
Monolithic Power Systems (MPS)
Danh mục Sản phẩm: Bộ điều khiển điện áp hoán đổi nóng
RoHS:  
Hot-Swap Protection Devices
20 A
16 V
2.7 V
1 Channel
2.1 mA
- 40 C
+ 125 C
SMD/SMT
LGA-26
Reel
Cut Tape
MouseReel
Yes
Nhãn hiệu: Monolithic Power Systems (MPS)
Quốc gia Hội nghị: Not Available
Quốc gia phân phối: Not Available
Quốc gia xuất xứ: CN
Bộ công cụ phát triển: EV5026-V-00A
Điện áp đầu vào / nguồn cấp - Tối đa: 16 V
Điện áp đầu vào / nguồn cấp - Tối thiểu: 2.7 V
Nhạy với độ ẩm: Yes
Pd - Tiêu tán nguồn: 4.09 W
Loại sản phẩm: Hot Swap Voltage Controllers
Sê-ri: MP5026
Số lượng Kiện Gốc: 5000
Danh mục phụ: PMIC - Power Management ICs
Đã tìm thấy các sản phẩm:
Để hiển thị sản phẩm tương tự, hãy chọn ít nhất một ô
Chọn ít nhất một hộp kiểm ở trên để hiển thị các sản phẩm tương tự trong danh mục này.
Các thuộc tính đã chọn: 0

Chức năng này cần phải bật JavaScript.

USHTS:
8542390090
MXHTS:
8542399999
ECCN:
EAR99

MP5026 Hot-Swap Intelli-Fuse Solutions

Monolithic Power Systems (MPS) MP5026 Hot-Swap Intelli-Fuse Solutions are created to protect circuitry on its output from transients on its input. Furthermore, the device protects its input from undesired shorts and transients from its output. The MP5026 can reach up to 20A of continuous output current (IOUT) per device at room temperature.

LM5060 High-Side Protection Controllers

Texas Instruments LM5060 High-Side Protection Controllers with Low Quiescent Current offers intelligent control of a high-side N-channel MOSFET during normal on/off transitions and fault conditions. The constant rise time of the output voltage results from the inrush current control. Both an Input UVLO (with hysteresis) and a programmable input OVP are provided, with an enable input offering a remote on or off control. The initial start-up VGS fault detection delay time, the transition VDS fault detection delay time, and the continuous over-current VDS fault detection delay time is programmed from a single capacitor. The MOSFET is latched off until either the enable input, or the UVLO input is toggled low and then high when a detected fault condition persists longer than the allowed fault delay time.