MP6515GL-P

Monolithic Power Systems (MPS)
946-MP6515GL-P
MP6515GL-P

Nsx:

Mô tả:
Motor / Motion / Ignition Controllers & Drivers 35V 2.8A H-Bridge Motor Driver

Mô hình ECAD:
Tải xuống Thư viện Tải miễn phí để chuyển đổi tệp tin này cho Công cụ ECAD của bạn. Tìm hiểu thêm về Mô hình ECAD.

Sẵn có

Tồn kho:
Không Lưu kho
Thời gian sản xuất của nhà máy:
18 Tuần Thời gian sản xuất tại nhà máy dự kiến.
Tối thiểu: 1   Nhiều: 1
Đơn giá:
$-.--
Thành tiền:
$-.--
Dự kiến Thuế quan:

Giá (USD)

Số lượng Đơn giá
Thành tiền
$3.62 $3.62
$2.39 $23.90
$2.21 $55.25
$1.92 $192.00
$1.80 $450.00
Toàn bộ Cuộn (Đơn hàng theo bội số của 500)
$1.31 $655.00
$1.25 $1,250.00
$1.20 $3,000.00
$1.18 $5,900.00

Bao bì thay thế

Nsx Mã Phụ tùng:
Đóng gói:
Reel, Cut Tape
Sẵn có:
Có hàng
Giá:
$3.11
Tối thiểu:
1

Sản phẩm Tương tự

Monolithic Power Systems (MPS) MP6515GL-Z
Monolithic Power Systems (MPS)
Motor / Motion / Ignition Controllers & Drivers 35V 2.8A H-Bridge Motor Driver

Đặc tính Sản phẩm Thuộc tính giá trị Chọn thuộc tính
Monolithic Power Systems (MPS)
Danh mục Sản phẩm: Bộ điều khiển & mạch điều khiển động cơ / chuyển động / đánh lửa
Brushed DC Motor Drivers
Half Bridge
2.8 A
1.5 mA
- 40 C
+ 125 C
SMD/SMT
QFN-20
Reel
Cut Tape
Nhãn hiệu: Monolithic Power Systems (MPS)
Quốc gia Hội nghị: Not Available
Quốc gia phân phối: Not Available
Quốc gia xuất xứ: Not Available
Số lượng đầu ra: 2 Output
Pd - Tiêu tán nguồn: 2.6 W
Loại sản phẩm: Motor / Motion / Ignition Controllers & Drivers
Sê-ri: MP6515
Số lượng Kiện Gốc: 500
Danh mục phụ: PMIC - Power Management ICs
Điện áp cấp nguồn - Tối đa: 35 V
Điện áp cấp nguồn - Tối thiểu: 5.4 V
Đã tìm thấy các sản phẩm:
Để hiển thị sản phẩm tương tự, hãy chọn ít nhất một ô
Chọn ít nhất một hộp kiểm ở trên để hiển thị các sản phẩm tương tự trong danh mục này.
Các thuộc tính đã chọn: 0

CNHTS:
8542390000
CAHTS:
8542390000
USHTS:
8542310030
MXHTS:
8542399901
ECCN:
EAR99

MP651x H-Bridge Motor Drivers

Monolithic Power Systems (MPS) MP651x H-Bridge Motor Drivers operate from a supply voltage of up to 35V and deliver a motor current of up to 2.8A. These Monolithic Power Systems motor drivers are used to drive DC brush motors. The MP651x motor drivers feature an internal current-sensing circuit that provides an output voltage proportional to the load current. These devices provide cycle-by-cycle current regulation and limiting. The MP651x motor drivers offer internal safety features such as over-current protection, input over-voltage protection, Under-Voltage Lock-Out (UVLO), and thermal shutdown.