MP6603GV-P

Monolithic Power Systems (MPS)
946-MP6603GV-P
MP6603GV-P

Nsx:

Mô tả:
Motor / Motion / Ignition Controllers & Drivers 55V, Dual Full-Bridge Motor Driver with Internal Current Sense

Tuổi thọ:
Sản phẩm Mới:
Mới từ nhà sản xuất này.
Mô hình ECAD:
Tải xuống Thư viện Tải miễn phí để chuyển đổi tệp tin này cho Công cụ ECAD của bạn. Tìm hiểu thêm về Mô hình ECAD.

Có hàng: 350

Tồn kho:
350 Có thể Giao hàng Ngay
Thời gian sản xuất của nhà máy:
22 Tuần Thời gian sản xuất tại nhà máy dự kiến để có số lượng lớn hơn mức hiển thị.
Tối thiểu: 1   Nhiều: 1
Đơn giá:
$-.--
Thành tiền:
$-.--
Dự kiến Thuế quan:

Giá (USD)

Số lượng Đơn giá
Thành tiền
$8.43 $8.43
$5.89 $58.90
$5.62 $140.50
$4.88 $488.00
$4.66 $1,165.00
Toàn bộ Cuộn (Đơn hàng theo bội số của 500)
$3.85 $1,925.00
$3.70 $3,700.00
$3.63 $9,075.00
5,000 Báo giá

Đặc tính Sản phẩm Thuộc tính giá trị Chọn thuộc tính
Monolithic Power Systems (MPS)
Danh mục Sản phẩm: Bộ điều khiển & mạch điều khiển động cơ / chuyển động / đánh lửa
Motor Driver
Full-Bridge Motor Driver
5 A
8 mA
- 40 C
+ 125 C
SMD/SMT
QFN-25
Reel
Cut Tape
Nhãn hiệu: Monolithic Power Systems (MPS)
Quốc gia Hội nghị: Not Available
Quốc gia phân phối: Not Available
Quốc gia xuất xứ: CN
Tần số vận hành: 100 kHz
Pd - Tiêu tán nguồn: 3.29 W
Loại sản phẩm: Motor / Motion / Ignition Controllers & Drivers
Số lượng Kiện Gốc: 500
Danh mục phụ: PMIC - Power Management ICs
Điện áp cấp nguồn - Tối đa: 55 V
Điện áp cấp nguồn - Tối thiểu: 8 V
Đã tìm thấy các sản phẩm:
Để hiển thị sản phẩm tương tự, hãy chọn ít nhất một ô
Chọn ít nhất một hộp kiểm ở trên để hiển thị các sản phẩm tương tự trong danh mục này.
Các thuộc tính đã chọn: 0

USHTS:
8542390090
MXHTS:
8542399999
ECCN:
EAR99

MP6603 Dual Full-Bridge Motor Drivers

Monolithic Power Systems (MPS) MP6603 Dual Full-Bridge Motor Drivers incorporate low RDS(on) MOSFETs to deliver efficient and reliable performance. The driver's high level of integration, combined with a compact 4mm × 5mm QFN‑25 package, makes the MPS MP6603 motor drivers a cost‑effective choice for both brushed DC motor and stepper motor applications. Designed to operate from an 8V to 55V supply, the MP6603 drivers provide up to 5A peak current per full bridge, with actual current capability dependent on ambient conditions and PCB thermal design. Each half‑bridge includes its own independent ground pin, allowing accurate current measurement through an external shunt resistor.