MPQ2484GF-AEC1-P

Monolithic Power Systems (MPS)
946-MPQ2484GF-AEC1-P
MPQ2484GF-AEC1-P

Nsx:

Mô tả:
LED Lighting Driver ICs 75V Asynchronous Multi-TopologyLED ControllerAEC-Q100 Qualified

Mô hình ECAD:
Tải xuống Thư viện Tải miễn phí để chuyển đổi tệp tin này cho Công cụ ECAD của bạn. Tìm hiểu thêm về Mô hình ECAD.

Có hàng: 264

Tồn kho:
264 Có thể Giao hàng Ngay
Thời gian sản xuất của nhà máy:
26 Tuần Thời gian sản xuất tại nhà máy dự kiến để có số lượng lớn hơn mức hiển thị.
Số lượng lớn hơn 264 sẽ phải tuân thủ các yêu cầu đặt hàng tối thiểu.
Tối thiểu: 1   Nhiều: 1
Đơn giá:
$-.--
Thành tiền:
$-.--
Dự kiến Thuế quan:

Giá (USD)

Số lượng Đơn giá
Thành tiền
$4.54 $4.54
$3.45 $34.50
$3.18 $79.50
$2.88 $288.00
$2.74 $685.00
Toàn bộ Cuộn (Đơn hàng theo bội số của 500)
$2.64 $1,320.00
$2.53 $2,530.00
$2.47 $6,175.00

Đặc tính Sản phẩm Thuộc tính giá trị Chọn thuộc tính
Monolithic Power Systems (MPS)
Danh mục Sản phẩm: IC bộ điều khiển chiếu sáng đèn LED
RoHS:  
Buck-Boost
TSSOP-28EP
45 V
4.5 V
100 kHz to 2.2 MHz
MPQ2484
- 40 C
+ 150 C
Cycle-by-Cycle Current Limit, Output Overvoltage Protection, One or More LEDs Short Protection, Fault Flag Output, External Loop Compensation
AEC-Q100
Reel
Cut Tape
Nhãn hiệu: Monolithic Power Systems (MPS)
Quốc gia Hội nghị: Not Available
Quốc gia phân phối: Not Available
Quốc gia xuất xứ: CN
Làm mờ: Analog, PWM
Để sử dụng với: Automotive Exterior LED Lighting
Điện áp đầu vào: 4.5 V to 45 V
Nhạy với độ ẩm: Yes
Kiểu gắn: SMD/SMT
Pd - Tiêu tán nguồn: 3.9 W
Sản phẩm: LED Controllers
Loại sản phẩm: LED Lighting Drivers
Số lượng Kiện Gốc: 500
Danh mục phụ: Driver ICs
Đã tìm thấy các sản phẩm:
Để hiển thị sản phẩm tương tự, hãy chọn ít nhất một ô
Chọn ít nhất một hộp kiểm ở trên để hiển thị các sản phẩm tương tự trong danh mục này.
Các thuộc tính đã chọn: 0

CNHTS:
8542399000
CAHTS:
8542390000
USHTS:
8542390090
TARIC:
8542399000
MXHTS:
8542399999
ECCN:
EAR99

IS32LT3175N/P Single-Channel Linear LED Drivers

ISSI IS32LT3175N/P Single-Channel Linear LED Drivers come with fade in/out and PWM dimming. The regulators serve as a stand-alone LED driver-configurable from 20mA to 150mA with external resistors, no microcontroller is necessary. A logic level “courtesy light” signal from the PWM pin can be interfaced to precisely drive the LED channel. The IS32LT3175P obtains a positive polarity PWM signal. In addition, the IS32LT3175N obtains a negative polarity PWM signal. The regulator integrates a 63-step fade-in and fades out the algorithm (Gamma correction). This causes the output LED current to increasingly rise up to the full source value after the EN pin is pulsed.

MPQ2484 Multi-Topology LED Controllers

Monolithic Power Systems (MPS) MPQ2484 Multi-Topology LED Controllers are flexible, asynchronous, and designed for LED lights with high brightness. The MPQ2484 offers buck, boost, and buck-boost configurations, ideal for multi-purpose applications. The controllers provide a 4.5V to 45V wide input voltage (VIN) range with a maximum boost voltage up to 75V. Fast transient response is initiated via peakcurrent mode operation that also eases loop stabilization.