L99ASC03

STMicroelectronics
511-L99ASC03
L99ASC03

Nsx:

Mô tả:
Motor / Motion / Ignition Controllers & Drivers Brushless/Sensorless 3-phase Mtr Pre-Dvr

Tuổi thọ:
NRND:
Không khuyến khích cho thiết kế mới.
Mô hình ECAD:
Tải xuống Thư viện Tải miễn phí để chuyển đổi tệp tin này cho Công cụ ECAD của bạn. Tìm hiểu thêm về Mô hình ECAD.

Sẵn có

Tồn kho:
Không Lưu kho
Thời gian sản xuất của nhà máy:
28 Tuần Thời gian sản xuất tại nhà máy dự kiến.
Thời gian giao hàng lâu được báo cáo trên sản phẩm này.
Tối thiểu: 1500   Nhiều: 1500
Đơn giá:
$-.--
Thành tiền:
$-.--
Dự kiến Thuế quan:
Sản phẩm này được Vận chuyển MIỄN PHÍ

Giá (USD)

Số lượng Đơn giá
Thành tiền
$3.43 $5,145.00

Bao bì thay thế

Nsx Mã Phụ tùng:
Đóng gói:
Reel, Cut Tape
Sẵn có:
Có hàng
Giá:
$4.88
Tối thiểu:
1

Sản phẩm Tương tự

STMicroelectronics L99ASC03GTR
STMicroelectronics
Motor / Motion / Ignition Controllers & Drivers Brushless/Sensorless 3-phase motor pre-driver for automotive applications

Đặc tính Sản phẩm Thuộc tính giá trị Chọn thuộc tính
STMicroelectronics
Danh mục Sản phẩm: Bộ điều khiển & mạch điều khiển động cơ / chuyển động / đánh lửa
RoHS:  
Brushless DC Motor Controllers
3 Phase
200 mA
60 uA
- 40 C
+ 150 C
SMD/SMT
TQFP-48
AEC-Q100
Tray
Nhãn hiệu: STMicroelectronics
Quốc gia Hội nghị: Not Available
Quốc gia phân phối: Not Available
Quốc gia xuất xứ: KR
Nhạy với độ ẩm: Yes
Số lượng đầu ra: 1 Output
Tần số vận hành: 200 kHz
Điện áp đầu ra: 5 V
Loại sản phẩm: Motor / Motion / Ignition Controllers & Drivers
Sê-ri: L99ASC03
Số lượng Kiện Gốc: 1500
Danh mục phụ: PMIC - Power Management ICs
Điện áp cấp nguồn - Tối đa: 28 V
Đơn vị Khối lượng: 9.072 g
Đã tìm thấy các sản phẩm:
Để hiển thị sản phẩm tương tự, hãy chọn ít nhất một ô
Chọn ít nhất một hộp kiểm ở trên để hiển thị các sản phẩm tương tự trong danh mục này.
Các thuộc tính đã chọn: 0

CNHTS:
8542310000
CAHTS:
8542310000
USHTS:
8542390090
MXHTS:
8542310302
ECCN:
EAR99

L99ASC03G Multifunctional System IC

STMicroelectronics L99ASC03G Multifunctional System IC is a brushless/sensorless 3-phase motor pre-driver for automotive applications. The L99ASC03G features a voltage regulator to supply an external microcontroller and an operation amplifier for motor current sensing. The IC is designed to control six external N-channel MOSFETs in bridge configuration to drive three-phase motors in automotive applications. All gate driver outputs are controlled by separate inputs. The integrated Serial Peripheral Interface (SPI) can be used to adjust device parameters, control all operating modes and read out diagnostic information. Applications for the STMicroelectronics L99ASC03G Multifunctional System IC are Mechatronic three-phase motors such as engine cooling fans, fuel pumps, water pumps, and oil pumps.