DRV8833PWR

Texas Instruments
595-DRV8833PWR
DRV8833PWR

Nsx:

Mô tả:
Motor / Motion / Ignition Controllers & Drivers 10.8-V 2-A dual H-b ridge motor driver w A 595-DRV8833PW

Mô hình ECAD:
Tải xuống Thư viện Tải miễn phí để chuyển đổi tệp tin này cho Công cụ ECAD của bạn. Tìm hiểu thêm về Mô hình ECAD.

Có hàng: 1,632

Tồn kho:
1,632 Có thể Giao hàng Ngay
Thời gian sản xuất của nhà máy:
6 Tuần Thời gian sản xuất tại nhà máy dự kiến để có số lượng lớn hơn mức hiển thị.
Tối thiểu: 1   Nhiều: 1
Đơn giá:
$-.--
Thành tiền:
$-.--
Dự kiến Thuế quan:
Đóng gói:
Toàn bộ Cuộn (Đơn hàng theo bội số của 2000)

Giá (USD)

Số lượng Đơn giá
Thành tiền
Cut Tape / MouseReel™
$2.63 $2.63
$1.97 $19.70
$1.80 $45.00
$1.61 $161.00
$1.53 $382.50
$1.47 $735.00
$1.43 $1,430.00
Toàn bộ Cuộn (Đơn hàng theo bội số của 2000)
$1.37 $2,740.00
$1.35 $5,400.00
† $7.00 Phí MouserReel™ sẽ được thêm và tính vào giỏ hàng của bạn. Không thể hủy và gửi trả tất cả đơn hàng MouseReel™.

Bao bì thay thế

Nsx Mã Phụ tùng:
Đóng gói:
Tube
Sẵn có:
Có hàng
Giá:
$2.62
Tối thiểu:
1

Sản phẩm Tương tự

Texas Instruments DRV8833PW
Texas Instruments
Motor / Motion / Ignition Controllers & Drivers 10.8-V 2-A dual H-b ridge motor driver w A 595-DRV8833PWR
Hết hạn sử dụng: Nhà sản xuất đã lên kế hoạch ngừng và sẽ không sản xuất nữa.

Đặc tính Sản phẩm Thuộc tính giá trị Chọn thuộc tính
Texas Instruments
Danh mục Sản phẩm: Bộ điều khiển & mạch điều khiển động cơ / chuyển động / đánh lửa
RoHS:  
Stepper Motor Controllers / Drivers
Half Bridge
1.5 A
1.7 mA
- 40 C
+ 85 C
SMD/SMT
TSSOP-16
Reel
Cut Tape
MouseReel
Nhãn hiệu: Texas Instruments
Quốc gia Hội nghị: MY
Quốc gia phân phối: JP
Quốc gia xuất xứ: MY
Bộ công cụ phát triển: DRV8833EVM
Nhạy với độ ẩm: Yes
Số lượng đầu ra: 2 Output
Loại sản phẩm: Motor / Motion / Ignition Controllers & Drivers
Sê-ri: DRV8833
Số lượng Kiện Gốc: 2000
Danh mục phụ: PMIC - Power Management ICs
Điện áp cấp nguồn - Tối đa: 10.8 V
Điện áp cấp nguồn - Tối thiểu: 2.7 V
Đơn vị Khối lượng: 62 mg
Đã tìm thấy các sản phẩm:
Để hiển thị sản phẩm tương tự, hãy chọn ít nhất một ô
Chọn ít nhất một hộp kiểm ở trên để hiển thị các sản phẩm tương tự trong danh mục này.
Các thuộc tính đã chọn: 0

Chức năng này cần phải bật JavaScript.

CNHTS:
8542391090
CAHTS:
8542390000
USHTS:
8542310030
JPHTS:
854239099
TARIC:
8542399000
MXHTS:
8542399901
ECCN:
EAR99

DRV8833 Dual H-Bridge Motor Drivers

Texas Instruments DRV8833 dual H-bridge motor drivers provide a dual bridge motor driver solution for toys, printers, and other mechatronic applications. The DRV8833 has two H-bridge drivers and can drive two DC brush motors, a bipolar stepper motor, solenoids, or other inductive loads. The out driver block of each H-bridge consists of N-channel power MOSFETs configured as an H-bridge to drive the motor windings. Each H-bridge includes circuitry to regulate or limit the winding current. Texas Instruments DRV8833 dual H-bridge motor drivers are capable of driving up to 1.5A RMS (or DC) continuously at 25ºC with a VM supply of 5V. It can support peak currents of up to 2A per bridge. Current capability is reduced slightly at lower VM voltages.

DRV8x Integrated Motor Drivers

Texas Instruments DRV8x motor drivers are intended to drive an electromagnetic machine, such as a brushed or brushless motor, stepper motor, or other electromechanical actuator. The TI DRV8x family of integrated motor drivers enable designers to quickly and easily spin their motors, reducing time to market and greatly simplifying design. By integrating the gate drive circuitry, sense amps, protection, FETS, industry standard control interfaces, and drive algorithms, the design complexity, board space, and time to spin a motor have all be greatly reduced. With on-chip protection including overcurrent, thermal, shoot-through, and undervoltage, the DRV8x family is robust, reliable, and fully protected.