DRV8847PWR

Texas Instruments
595-DRV8847PWR
DRV8847PWR

Nsx:

Mô tả:
Motor / Motion / Ignition Controllers & Drivers 18-V 2-A dual H-bri dge motor driver wit A 595-DRV8847PWPR

Mô hình ECAD:
Tải xuống Thư viện Tải miễn phí để chuyển đổi tệp tin này cho Công cụ ECAD của bạn. Tìm hiểu thêm về Mô hình ECAD.

Có hàng: 2,300

Tồn kho:
2,300 Có thể Giao hàng Ngay
Thời gian sản xuất của nhà máy:
12 Tuần Thời gian sản xuất tại nhà máy dự kiến để có số lượng lớn hơn mức hiển thị.
Tối thiểu: 1   Nhiều: 1
Đơn giá:
$-.--
Thành tiền:
$-.--
Dự kiến Thuế quan:
Đóng gói:
Toàn bộ Cuộn (Đơn hàng theo bội số của 2000)

Giá (USD)

Số lượng Đơn giá
Thành tiền
Cut Tape / MouseReel™
$2.68 $2.68
$2.00 $20.00
$1.83 $45.75
$1.64 $164.00
$1.55 $387.50
$1.50 $750.00
$1.46 $1,460.00
Toàn bộ Cuộn (Đơn hàng theo bội số của 2000)
$1.40 $2,800.00
$1.37 $5,480.00
† $7.00 Phí MouserReel™ sẽ được thêm và tính vào giỏ hàng của bạn. Không thể hủy và gửi trả tất cả đơn hàng MouseReel™.

Bao bì thay thế

Nsx Mã Phụ tùng:
Đóng gói:
Reel, Cut Tape, MouseReel
Sẵn có:
Có hàng
Giá:
$2.63
Tối thiểu:
1

Sản phẩm Tương tự

Texas Instruments DRV8847PWPR
Texas Instruments
Motor / Motion / Ignition Controllers & Drivers 18-V 2-A dual H-bri dge motor driver wit A 595-DRV8847PWR

Đặc tính Sản phẩm Thuộc tính giá trị Chọn thuộc tính
Texas Instruments
Danh mục Sản phẩm: Bộ điều khiển & mạch điều khiển động cơ / chuyển động / đánh lửa
RoHS:  
Stepper Motor Controllers / Drivers
Half Bridge
2 A
3 mA
- 40 C
+ 125 C
SMD/SMT
TSSOP-16
Reel
Cut Tape
MouseReel
Nhãn hiệu: Texas Instruments
Quốc gia Hội nghị: Not Available
Quốc gia phân phối: Not Available
Quốc gia xuất xứ: MY
Định mức điện áp tải: 18 V
Nhạy với độ ẩm: Yes
Số lượng đầu ra: 2 Output
Tần số vận hành: 400 kHz
Điện áp đầu ra: 5 V
Loại sản phẩm: Motor / Motion / Ignition Controllers & Drivers
Sê-ri: DRV8847
Số lượng Kiện Gốc: 2000
Danh mục phụ: PMIC - Power Management ICs
Điện áp cấp nguồn - Tối đa: 18 V
Điện áp cấp nguồn - Tối thiểu: 2.7 V
Đơn vị Khối lượng: 59 mg
Đã tìm thấy các sản phẩm:
Để hiển thị sản phẩm tương tự, hãy chọn ít nhất một ô
Chọn ít nhất một hộp kiểm ở trên để hiển thị các sản phẩm tương tự trong danh mục này.
Các thuộc tính đã chọn: 0

Chức năng này cần phải bật JavaScript.

CNHTS:
8542391000
CAHTS:
8542310000
USHTS:
8542310030
ECCN:
EAR99

DRV8847 Dual H-Bridge Motor Drivers

Texas Instruments DRV8847 Dual H-Bridge Motor Drivers are for industrial applications, home appliances, ePOS printers, and other mechatronic applications. These devices can be used for driving two DC motors, a bipolar stepper motor, or other loads such as relays. A simple PWM interface allows for an easy interface with the controller. The DRV8847 drivers operate off a single power supply and support a wide input supply range from 2.7 to 18V. The output stage of the driver consists of N-channel power MOSFETs configured as two full H-bridges to drive motor windings or four independent half bridges (in an independent bridge interface). A fixed-off time controls the peak current in the bridge, which can drive a 1A load (2A in parallel mode with proper heat sinking at 25°C TA).