DRV8880RHRR

Texas Instruments
595-DRV8880RHRR
DRV8880RHRR

Nsx:

Mô tả:
Motor / Motion / Ignition Controllers & Drivers 2A Stepper Motor Dri ver A 595-DRV8880RH A 595-DRV8880RHRT

Mô hình ECAD:
Tải xuống Thư viện Tải miễn phí để chuyển đổi tệp tin này cho Công cụ ECAD của bạn. Tìm hiểu thêm về Mô hình ECAD.

Sẵn có

Tồn kho:
Không Lưu kho
Thời gian sản xuất của nhà máy:
6 Tuần Thời gian sản xuất tại nhà máy dự kiến.
Tối thiểu: 3000   Nhiều: 3000
Đơn giá:
$-.--
Thành tiền:
$-.--
Dự kiến Thuế quan:
Sản phẩm này được Vận chuyển MIỄN PHÍ

Giá (USD)

Số lượng Đơn giá
Thành tiền
Toàn bộ Cuộn (Đơn hàng theo bội số của 3000)
$2.39 $7,170.00

Bao bì thay thế

Nsx Mã Phụ tùng:
Đóng gói:
Reel, Cut Tape, MouseReel
Sẵn có:
Giá:
$7.89
Tối thiểu:
1

Đặc tính Sản phẩm Thuộc tính giá trị Chọn thuộc tính
Texas Instruments
Danh mục Sản phẩm: Bộ điều khiển & mạch điều khiển động cơ / chuyển động / đánh lửa
RoHS:  
Stepper Motor Controllers / Drivers
Bipolar Stepper Motor Driver
2 A
8 mA
- 40 C
+ 125 C
WQFN-28
Reel
Nhãn hiệu: Texas Instruments
Quốc gia Hội nghị: Not Available
Quốc gia phân phối: Not Available
Quốc gia xuất xứ: Not Available
Số lượng đầu ra: 1 Output
Tần số vận hành: 100 kHz
Loại sản phẩm: Motor / Motion / Ignition Controllers & Drivers
Sê-ri: DRV8880
Số lượng Kiện Gốc: 3000
Danh mục phụ: PMIC - Power Management ICs
Điện áp cấp nguồn - Tối đa: 45 V
Điện áp cấp nguồn - Tối thiểu: 6.5 V
Đã tìm thấy các sản phẩm:
Để hiển thị sản phẩm tương tự, hãy chọn ít nhất một ô
Chọn ít nhất một hộp kiểm ở trên để hiển thị các sản phẩm tương tự trong danh mục này.
Các thuộc tính đã chọn: 0

Chức năng này cần phải bật JavaScript.

CNHTS:
8542319000
CAHTS:
8542390000
USHTS:
8542390090
JPHTS:
854239099
TARIC:
8542399000
MXHTS:
8542399901
ECCN:
EAR99

DRV8880 2A Stepper Motor Driver

Texas Instruments DRV8880 2A Stepper Motor Driver is a bipolar stepper motor driver for industrial applications. The device has two N-channel power MOSFET H-bridge drivers and a microstepping indexer. The DRV8880 is capable of driving 2.0A full-scale current or 1.4A rms current (with proper PCB ground plane for thermal dissipation and at 24V and TA = 25°C). AutoTune™ automatically tunes stepper motors for optimal current regulation performance and compensates for motor variation and aging effects. The STEP/DIR pins provide a simple control interface. The device can be configured in full-step up to 1/16- step modes. A low-power sleep mode is provided for very low quiescent current standby using a dedicated nSLEEP pin.