SN65HVD1780D

Texas Instruments
595-SN65HVD1780D
SN65HVD1780D

Nsx:

Mô tả:
RS-485 Interface IC 70V Fault-Prot RS485 Xcvr A 595-SN65HVD1 A 595-SN65HVD1780DR

Mô hình ECAD:
Tải xuống Thư viện Tải miễn phí để chuyển đổi tệp tin này cho Công cụ ECAD của bạn. Tìm hiểu thêm về Mô hình ECAD.

Có hàng: 453

Tồn kho:
453 Có thể Giao hàng Ngay
Thời gian sản xuất của nhà máy:
6 Tuần Thời gian sản xuất tại nhà máy dự kiến để có số lượng lớn hơn mức hiển thị.
Tối thiểu: 1   Nhiều: 1
Đơn giá:
$-.--
Thành tiền:
$-.--
Dự kiến Thuế quan:

Giá (USD)

Số lượng Đơn giá
Thành tiền
$5.92 $5.92
$4.55 $45.50
$3.89 $97.25
$3.72 $279.00
$3.51 $1,842.75
$3.42 $3,591.00
$3.33 $9,990.00

Bao bì thay thế

Nsx Mã Phụ tùng:
Đóng gói:
Tube
Sẵn có:
Có hàng
Giá:
$8.09
Tối thiểu:
1
Nsx Mã Phụ tùng:
Đóng gói:
Reel, Cut Tape, MouseReel
Sẵn có:
Có hàng
Giá:
$4.61
Tối thiểu:
1

Sản phẩm Tương tự

Texas Instruments SN65HVD1780DR
Texas Instruments
RS-485 Interface IC 70V Fault-Prot RS485 Xcvr A 595-SN65HVD1 A 595-SN65HVD1780D

Đặc tính Sản phẩm Thuộc tính giá trị Chọn thuộc tính
Texas Instruments
Danh mục Sản phẩm: IC giao diện RS-485
RoHS:  
SMD/SMT
SOIC-8
SN65HVD1780
Transceiver
115 kb/s
1 Driver
1 Receiver
Half Duplex
5.5 V
3.15 V
6 mA
- 40 C
+ 105 C
16 kV
Tube
Nhãn hiệu: Texas Instruments
Quốc gia Hội nghị: Not Available
Quốc gia phân phối: Not Available
Quốc gia xuất xứ: MY
Điện áp cấp vận hành: 3.3 V, 5 V
Pd - Tiêu tán nguồn: 905 mW
Sản phẩm: RS-485 Transceivers
Loại sản phẩm: RS-485 Interface IC
Thời gian trễ lan truyền: 2000 ns, 200 ns
Tắt: No Shutdown
Số lượng Kiện Gốc: 75
Danh mục phụ: Interface ICs
Đơn vị Khối lượng: 200 mg
Đã tìm thấy các sản phẩm:
Để hiển thị sản phẩm tương tự, hãy chọn ít nhất một ô
Chọn ít nhất một hộp kiểm ở trên để hiển thị các sản phẩm tương tự trong danh mục này.
Các thuộc tính đã chọn: 0

Chức năng này cần phải bật JavaScript.

CNHTS:
8542399000
CAHTS:
8542390000
USHTS:
8542390090
JPHTS:
8542390990
TARIC:
8542399000
MXHTS:
8542399999
ECCN:
EAR99

SN65HVD1780/1781/1782 RS-485 Transceivers

Texas Instruments SN65HVD1780/1781/1782 RS-485 Transceivers are designed to survive overvoltage faults such as direct shorts. These direct shorts can be to power supplies, mis-wiring faults, connector failures, cable crushes, and tool mis-applications. The devices are also robust to ESD events with high levels of protection to the human-body-model specification. The SN65HVD1780/1781/1782 devices combine a differential driver and a differential receiver, which operate from a single power supply. In the SN65HVD1782, the driver differential outputs and the receiver differential inputs are connected internally to form a bus port suitable for half-duplex (two-wire bus) communication. This port features a wide common- mode voltage range, making the devices suitable for multi-point applications over long cable runs.