TAS2552YFFR

Texas Instruments
595-TAS2552YFFR
TAS2552YFFR

Nsx:

Mô tả:
Audio Amplifiers 4W Class-D audio pow er Amp A 595-TAS255 A 595-TAS2552YFFT

Mô hình ECAD:
Tải xuống Thư viện Tải miễn phí để chuyển đổi tệp tin này cho Công cụ ECAD của bạn. Tìm hiểu thêm về Mô hình ECAD.

Có hàng: 3,637

Tồn kho:
3,637 Có thể Giao hàng Ngay
Thời gian sản xuất của nhà máy:
6 Tuần Thời gian sản xuất tại nhà máy dự kiến để có số lượng lớn hơn mức hiển thị.
Tối thiểu: 1   Nhiều: 1
Đơn giá:
$-.--
Thành tiền:
$-.--
Dự kiến Thuế quan:
Đóng gói:
Toàn bộ Cuộn (Đơn hàng theo bội số của 3000)

Giá (USD)

Số lượng Đơn giá
Thành tiền
Cut Tape / MouseReel™
$2.13 $2.13
$1.58 $15.80
$1.44 $36.00
$1.29 $129.00
$1.21 $302.50
$1.17 $585.00
$1.10 $1,100.00
Toàn bộ Cuộn (Đơn hàng theo bội số của 3000)
$0.997 $2,991.00
$0.976 $5,856.00
† $7.00 Phí MouserReel™ sẽ được thêm và tính vào giỏ hàng của bạn. Không thể hủy và gửi trả tất cả đơn hàng MouseReel™.

Đặc tính Sản phẩm Thuộc tính giá trị Chọn thuộc tính
Texas Instruments
Danh mục Sản phẩm: Bộ khuếch đại âm thanh
RoHS:  
Class-D, Class-G
4 W
0.1 %
DSBGA-30
8 Ohms
2.7 V
5.5 V
- 40 C
+ 85 C
SMD/SMT
TAS2552
Reel
Cut Tape
MouseReel
Nhãn hiệu: Texas Instruments
Quốc gia Hội nghị: PH
Quốc gia phân phối: US
Quốc gia xuất xứ: PH
Bộ công cụ phát triển: TAS2552EVM
Loại đầu vào: Analog
Số lượng kênh: 1 Channel
Sản phẩm: Audio Amplifiers
Loại sản phẩm: Audio Amplifiers
Số lượng Kiện Gốc: 3000
Danh mục phụ: Audio ICs
Loại: 1-Channel Mono
Đơn vị Khối lượng: 8 mg
Đã tìm thấy các sản phẩm:
Để hiển thị sản phẩm tương tự, hãy chọn ít nhất một ô
Chọn ít nhất một hộp kiểm ở trên để hiển thị các sản phẩm tương tự trong danh mục này.
Các thuộc tính đã chọn: 0

Chức năng này cần phải bật JavaScript.

CNHTS:
8542339000
CAHTS:
8542330000
USHTS:
8542330001
JPHTS:
8542330996
KRHTS:
8532331000
MXHTS:
8542330201
ECCN:
EAR99

TAS2555 Class-D Audio Amplifiers

Texas Instruments TAS2555 Class-D Mono Audio Amplifiers is state-of-the-art Class-D audio amplifier which is a full system on a Chip (SoC). The device features an ultra low-noise audio DAC and Class-D power amplifier which incorporates speaker voltage and current sensing feedback. An on-chip, low-latency DSP supports TI's SmartAmp speaker protection algorithms to maximizes loudness while maintaining safe speaker conditions. The device can be used easily with any processor with an I2S output. Stereo implementations are possible when using two TAS2555 devices. Separate tuning for different speakers is supported allowing customers to add value while maintaining form factor designs. Additionally, the TAS2555 supports separate voice and audio tuning dynamically with ultra-low 15.9µV ICN regardless of mode of operation making receiver/speaker implementations possible.