TCA6408APWR

Texas Instruments
595-TCA6408APWR
TCA6408APWR

Nsx:

Mô tả:
Interface - I/O Expanders Lo-Vltg 8B I2C & SMB us I/O Expander

Mô hình ECAD:
Tải xuống Thư viện Tải miễn phí để chuyển đổi tệp tin này cho Công cụ ECAD của bạn. Tìm hiểu thêm về Mô hình ECAD.

Có hàng: 2,511

Tồn kho:
2,511 Có thể Giao hàng Ngay
Thời gian sản xuất của nhà máy:
12 Tuần Thời gian sản xuất tại nhà máy dự kiến để có số lượng lớn hơn mức hiển thị.
Tối thiểu: 1   Nhiều: 1
Đơn giá:
$-.--
Thành tiền:
$-.--
Dự kiến Thuế quan:
Đóng gói:
Toàn bộ Cuộn (Đơn hàng theo bội số của 2000)

Giá (USD)

Số lượng Đơn giá
Thành tiền
Cut Tape / MouseReel™
$1.55 $1.55
$1.14 $11.40
$1.03 $25.75
$0.914 $91.40
$0.859 $214.75
$0.826 $413.00
Toàn bộ Cuộn (Đơn hàng theo bội số của 2000)
$0.771 $1,542.00
$0.753 $3,012.00
† $7.00 Phí MouserReel™ sẽ được thêm và tính vào giỏ hàng của bạn. Không thể hủy và gửi trả tất cả đơn hàng MouseReel™.

Đặc tính Sản phẩm Thuộc tính giá trị Chọn thuộc tính
Texas Instruments
Danh mục Sản phẩm: Giao diện - Bộ mở rộng I/O
RoHS:  
TCA6408A
SMD/SMT
TSSOP-16
I2C, Serial, SMBus
8 I/O
With Interrupt
1.65 V
5.5 V
400 kHz
- 40 C
+ 85 C
Reel
Cut Tape
MouseReel
2 kV
Nhãn hiệu: Texas Instruments
Quốc gia Hội nghị: MY
Quốc gia phân phối: DE
Quốc gia xuất xứ: MY
Đặc điểm nổi bật: Configuration Registers, Interrupt Pin, Reset Pin
Họ Logic: TCA6408A
Điện áp cấp vận hành: 1.65 V to 5.5 V
Loại sản phẩm: I/O Expanders
Số lượng Kiện Gốc: 2000
Danh mục phụ: Interface ICs
Đơn vị Khối lượng: 62 mg
Đã tìm thấy các sản phẩm:
Để hiển thị sản phẩm tương tự, hãy chọn ít nhất một ô
Chọn ít nhất một hộp kiểm ở trên để hiển thị các sản phẩm tương tự trong danh mục này.
Các thuộc tính đã chọn: 0

Chức năng này cần phải bật JavaScript.

CNHTS:
8542399000
CAHTS:
8542390000
USHTS:
8542390090
JPHTS:
8542390990
TARIC:
8542399000
MXHTS:
85423999
ECCN:
EAR99

TCA6408A/TCA6408-Q1 I2C & SMBus I/O Expander

Texas Instruments TCA6408A/TCA6408-Q1 I2C & SMBus I/O Expander provides 8-bits of general-purpose parallel input/output (I/O) expansion. This can be done for two-line bidirectional I2C bus or SMBus protocol. These can operate with a power supply voltage ranging from 1.65V to 5.5V. This is done on both the I2C bus side (VCCI) and on the P-port side (VCCP). The TCA6408A can interface with next-generation microprocessors and microcontrollers on the SDA/SCL side, where supply levels are dropping down to conserve power. In contrast to the dropping power supplies of microprocessors and microcontrollers, some PCB components such as LEDs, remain at a 5V power supply. The device supports both 100kHz (Standard mode) and 400kHz (Fast-mode) clock frequencies. The TCA6408A provides a simple solution when additional I/Os are needed for switches, sensors, pushbuttons, LEDs, fans, and so forth. The TCA6408-Q1 devices are AEC-Q100 qualified for automotive applications.