TLC6C5716QDAPRQ1

Texas Instruments
595-TLC6C5716QDAPRQ1
TLC6C5716QDAPRQ1

Nsx:

Mô tả:
LED Lighting Driver ICs Automotive 16 channe l Full diagnostics

Mô hình ECAD:
Tải xuống Thư viện Tải miễn phí để chuyển đổi tệp tin này cho Công cụ ECAD của bạn. Tìm hiểu thêm về Mô hình ECAD.

Có hàng: 7,900

Tồn kho:
7,900
Có thể Giao hàng Ngay
Đang đặt hàng:
8,000
Thời gian sản xuất của nhà máy:
18
Tuần Thời gian sản xuất tại nhà máy dự kiến để có số lượng lớn hơn mức hiển thị.
Tối thiểu: 1   Nhiều: 1
Đơn giá:
$-.--
Thành tiền:
$-.--
Dự kiến Thuế quan:
Đóng gói:
Toàn bộ Cuộn (Đơn hàng theo bội số của 2000)

Giá (USD)

Số lượng Đơn giá
Thành tiền
Cut Tape / MouseReel™
$3.00 $3.00
$2.25 $22.50
$2.06 $51.50
$1.86 $186.00
$1.76 $440.00
$1.70 $850.00
$1.65 $1,650.00
Toàn bộ Cuộn (Đơn hàng theo bội số của 2000)
$1.59 $3,180.00
$1.56 $6,240.00
† $7.00 Phí MouserReel™ sẽ được thêm và tính vào giỏ hàng của bạn. Không thể hủy và gửi trả tất cả đơn hàng MouseReel™.

Đặc tính Sản phẩm Thuộc tính giá trị Chọn thuộc tính
Texas Instruments
Danh mục Sản phẩm: IC bộ điều khiển chiếu sáng đèn LED
RoHS:  
16 Output
Boost
50 mA
HTSSOP-38
5.5 V
3 V
8 MHz
8 V
TLC6C5716
- 40 C
+ 125 C
PWM Dimming, Constant Current
AEC-Q100
Reel
Cut Tape
MouseReel
Nhãn hiệu: Texas Instruments
Quốc gia Hội nghị: TW
Quốc gia phân phối: US
Quốc gia xuất xứ: TW
Làm mờ: With Dimming
Dòng đầu ra mức cao: - 1 mA
Điện áp đầu vào: 3 V to 5.5 V
Dòng đầu ra mức thấp: 1 mA
Nhạy với độ ẩm: Yes
Kiểu gắn: SMD/SMT
Số lượng kênh: 16 Channel
Loại đầu ra: Constant Current
Sản phẩm: LED Drivers
Loại sản phẩm: LED Lighting Drivers
Số lượng Kiện Gốc: 2000
Danh mục phụ: Driver ICs
Dòng cấp nguồn - Tối đa: 16 mA
Loại: Automotive
Đơn vị Khối lượng: 289.400 mg
Đã tìm thấy các sản phẩm:
Để hiển thị sản phẩm tương tự, hãy chọn ít nhất một ô
Chọn ít nhất một hộp kiểm ở trên để hiển thị các sản phẩm tương tự trong danh mục này.
Các thuộc tính đã chọn: 0

Chức năng này cần phải bật JavaScript.

CNHTS:
8542399000
USHTS:
8542390090
TARIC:
8542399000
MXHTS:
8542399999
ECCN:
EAR99

IS32LT3175N/P Single-Channel Linear LED Drivers

ISSI IS32LT3175N/P Single-Channel Linear LED Drivers come with fade in/out and PWM dimming. The regulators serve as a stand-alone LED driver-configurable from 20mA to 150mA with external resistors, no microcontroller is necessary. A logic level “courtesy light” signal from the PWM pin can be interfaced to precisely drive the LED channel. The IS32LT3175P obtains a positive polarity PWM signal. In addition, the IS32LT3175N obtains a negative polarity PWM signal. The regulator integrates a 63-step fade-in and fades out the algorithm (Gamma correction). This causes the output LED current to increasingly rise up to the full source value after the EN pin is pulsed.

TLC6C57xx-Q1 Automotive RGB LED Drivers

Texas Instruments TLC6C57xx-Q1 Automotive RGB LED Drivers offer 16- and 24-channels of constant current with a supplied maximum of 50mA output current set by an external resistor. Features include a 7-bit dot correction (DC) for each channel with two ranges for each output. The device also has an 8-bit brightness control for the outputs of each color group. The TLC6C57xx-Q1 device can do tests on the LEDs, supplying protection and diagnostic features. These features include LED-Open Detection (LOD), LED-Short Detection (LSD), and Output Short-to-GND Detection (OSD).