TPS22943DCKR

Texas Instruments
595-TPS22943DCKR
TPS22943DCKR

Nsx:

Mô tả:
Power Switch ICs - Power Distribution Lo-Inp Vltg 40mA Cur rent Ltd Load Sw

Mô hình ECAD:
Tải xuống Thư viện Tải miễn phí để chuyển đổi tệp tin này cho Công cụ ECAD của bạn. Tìm hiểu thêm về Mô hình ECAD.

Có hàng: 2,752

Tồn kho:
2,752 Có thể Giao hàng Ngay
Thời gian sản xuất của nhà máy:
6 Tuần Thời gian sản xuất tại nhà máy dự kiến để có số lượng lớn hơn mức hiển thị.
Tối thiểu: 1   Nhiều: 1   Tối đa: 250
Đơn giá:
$-.--
Thành tiền:
$-.--
Dự kiến Thuế quan:
Đóng gói:
Toàn bộ Cuộn (Đơn hàng theo bội số của 3000)

Giá (USD)

Số lượng Đơn giá
Thành tiền
Cut Tape / MouseReel™
$1.02 $1.02
$0.737 $7.37
$0.666 $16.65
$0.587 $58.70
$0.55 $137.50
Toàn bộ Cuộn (Đơn hàng theo bội số của 3000)
$0.55 $1,650.00
† $7.00 Phí MouserReel™ sẽ được thêm và tính vào giỏ hàng của bạn. Không thể hủy và gửi trả tất cả đơn hàng MouseReel™.

Đặc tính Sản phẩm Thuộc tính giá trị Chọn thuộc tính
Texas Instruments
Danh mục Sản phẩm: IC chuyển mạch công suất - Phân phối nguồn
RoHS:  
Load Switch
1 Output
20 mA
40 mA
500 mOhms
60 us
30 us
1.62 V to 5.5 V
- 40 C
+ 85 C
SMD/SMT
SC70-5
TPS22943
Reel
Cut Tape
MouseReel
Nhãn hiệu: Texas Instruments
Quốc gia Hội nghị: Not Available
Quốc gia phân phối: Not Available
Quốc gia xuất xứ: CN
Loại sản phẩm: Power Switch ICs - Power Distribution
Số lượng Kiện Gốc: 3000
Danh mục phụ: Switch ICs
Điện áp cấp nguồn - Tối đa: 5.5 V
Điện áp cấp nguồn - Tối thiểu: 1.62 V
Đơn vị Khối lượng: 13 mg
Đã tìm thấy các sản phẩm:
Để hiển thị sản phẩm tương tự, hãy chọn ít nhất một ô
Chọn ít nhất một hộp kiểm ở trên để hiển thị các sản phẩm tương tự trong danh mục này.
Các thuộc tính đã chọn: 0

Chức năng này cần phải bật JavaScript.

CNHTS:
8542399000
CAHTS:
8542390000
USHTS:
8542390090
JPHTS:
8542390990
TARIC:
8542399000
MXHTS:
85423999
ECCN:
EAR99

Load Switch: TPS22943

The Texas Instruments TPS22943 current-limited load switch with shut off and auto-restart provides protection to systems and loads in high-current conditions. The TI TPS22943 contains a 400mΩ current-limited P-channel MOSFET that can operate over an input voltage range of 1.62V to 5.5V. The TPS22943 load switch features low on resistance and thermal shutdown protection that turns off the switch to prevent damage to the device when a continuous over-current condition causes excessive heating. This TI device is ideal for use in low-current sensor protection and HDMI connect protection applications.

TPS2294x Load Switches

Texas Instruments TPS2294x Load Switches protect systems and loads in high-current conditions. The TI TPS22946 ultra-low power load switch contains a 300mΩ current-limited P-channel MOSFET that operates over an input voltage range of 1.62V to 5.5V and also features an ultra-low quiescent current of 1µA (typical). The TI TPS22941and TPS22944 load switches contain a 400mΩ current-limited P-channel MOSFET. Texas Instruments TPS2294x load switches are designed for use in a variety of applications, including low-current sensor protection, portable consumer electronics, mobile phones, GPS devices, and more.

TPS229xx Load Switches

Texas Instruments TPS229xx Load Switches are small, low RON, single channel load switches with a controlled slew rate. Each device contains either an N-channel or P-channel MOSFET and is controlled by an on/off input, which is capable of interfacing directly with low-voltage control signals.