TPS24713DGSR

Texas Instruments
595-TPS24713DGSR
TPS24713DGSR

Nsx:

Mô tả:
Hot Swap Voltage Controllers 2.5-18V Hi Eff Hot- Swap Controller A 59 A 595-TPS24713DGS

Mô hình ECAD:
Tải xuống Thư viện Tải miễn phí để chuyển đổi tệp tin này cho Công cụ ECAD của bạn. Tìm hiểu thêm về Mô hình ECAD.

Có hàng: 2,387

Tồn kho:
2,387 Có thể Giao hàng Ngay
Thời gian sản xuất của nhà máy:
6 Tuần Thời gian sản xuất tại nhà máy dự kiến để có số lượng lớn hơn mức hiển thị.
Số lượng lớn hơn 2387 sẽ phải tuân thủ các yêu cầu đặt hàng tối thiểu.
Tối thiểu: 1   Nhiều: 1
Đơn giá:
$-.--
Thành tiền:
$-.--
Dự kiến Thuế quan:
Đóng gói:
Toàn bộ Cuộn (Đơn hàng theo bội số của 2500)

Giá (USD)

Số lượng Đơn giá
Thành tiền
Cut Tape / MouseReel™
$3.20 $3.20
$2.40 $24.00
$2.20 $55.00
$1.98 $198.00
$1.88 $470.00
$1.81 $905.00
$1.76 $1,760.00
Toàn bộ Cuộn (Đơn hàng theo bội số của 2500)
$1.70 $4,250.00
$1.67 $8,350.00
† $7.00 Phí MouserReel™ sẽ được thêm và tính vào giỏ hàng của bạn. Không thể hủy và gửi trả tất cả đơn hàng MouseReel™.

Đặc tính Sản phẩm Thuộc tính giá trị Chọn thuộc tính
Texas Instruments
Danh mục Sản phẩm: Bộ điều khiển điện áp hoán đổi nóng
RoHS:  
Controllers & Switches
Programmable
18 V
2.5 V
1 Channel
1 mA
- 40 C
+ 85 C
SMD/SMT
MSOP-10
Reel
Cut Tape
MouseReel
Yes
Nhãn hiệu: Texas Instruments
Quốc gia Hội nghị: Not Available
Quốc gia phân phối: Not Available
Quốc gia xuất xứ: TH
Pd - Tiêu tán nguồn: 240 mW
Loại sản phẩm: Hot Swap Voltage Controllers
Sê-ri: TPS24713
Số lượng Kiện Gốc: 2500
Danh mục phụ: PMIC - Power Management ICs
Đơn vị Khối lượng: 23.700 mg
Đã tìm thấy các sản phẩm:
Để hiển thị sản phẩm tương tự, hãy chọn ít nhất một ô
Chọn ít nhất một hộp kiểm ở trên để hiển thị các sản phẩm tương tự trong danh mục này.
Các thuộc tính đã chọn: 0

Chức năng này cần phải bật JavaScript.

CNHTS:
8542319090
CAHTS:
8542390000
USHTS:
8542390090
JPHTS:
854239099
TARIC:
8542399000
MXHTS:
8542399901
ECCN:
EAR99

TPS2471 Power-Limiting Hot-Swap Controllers

Texas Instruments TPS2471 2.5V to 18V High-Efficiency Power-Limiting Hot-Swap Controllers offer a safe solution to driving an external N-channel MOSFET. The TPS2471 offers protection features, including programmable current limit and fault time to protect the supply and load from the excessive current at startup. The device provides currents above the user-selected limit that are allowed to flow until programmed timeout after startup. The exception is in extreme overload events when the load is immediately disconnected from the source. The current sense threshold at 25mV is highly accurate and allows the use of smaller, more efficient sense resistors. These features make the TPS2471 offer a lower power loss and a smaller footprint. The programmable power limiting ensures the external MOSFET operates inside its safe operating area (SOA) at all times. This feature improves system reliability by allowing the use of smaller MOSFETs.

LM5060 High-Side Protection Controllers

Texas Instruments LM5060 High-Side Protection Controllers with Low Quiescent Current offers intelligent control of a high-side N-channel MOSFET during normal on/off transitions and fault conditions. The constant rise time of the output voltage results from the inrush current control. Both an Input UVLO (with hysteresis) and a programmable input OVP are provided, with an enable input offering a remote on or off control. The initial start-up VGS fault detection delay time, the transition VDS fault detection delay time, and the continuous over-current VDS fault detection delay time is programmed from a single capacitor. The MOSFET is latched off until either the enable input, or the UVLO input is toggled low and then high when a detected fault condition persists longer than the allowed fault delay time.