TPS25200QDRVTQ1

Texas Instruments
595-TPS25200QDRVTQ1
TPS25200QDRVTQ1

Nsx:

Mô tả:
Hot Swap Voltage Controllers Auto TPS25200-Q1 5-V eFuse A 595-TPS2520 A 595-TPS25200QDRVRQ1

Mô hình ECAD:
Tải xuống Thư viện Tải miễn phí để chuyển đổi tệp tin này cho Công cụ ECAD của bạn. Tìm hiểu thêm về Mô hình ECAD.

Có hàng: 1,424

Tồn kho:
1,424 Có thể Giao hàng Ngay
Thời gian sản xuất của nhà máy:
6 Tuần Thời gian sản xuất tại nhà máy dự kiến để có số lượng lớn hơn mức hiển thị.
Tối thiểu: 1   Nhiều: 1
Đơn giá:
$-.--
Thành tiền:
$-.--
Dự kiến Thuế quan:
Đóng gói:
Toàn bộ Cuộn (Đơn hàng theo bội số của 250)

Giá (USD)

Số lượng Đơn giá
Thành tiền
Cut Tape / MouseReel™
$1.19 $1.19
$0.862 $8.62
$0.78 $19.50
$0.689 $68.90
Toàn bộ Cuộn (Đơn hàng theo bội số của 250)
$0.645 $161.25
$0.606 $303.00
$0.584 $584.00
$0.575 $1,437.50
$0.558 $2,790.00
† $7.00 Phí MouserReel™ sẽ được thêm và tính vào giỏ hàng của bạn. Không thể hủy và gửi trả tất cả đơn hàng MouseReel™.

Bao bì thay thế

Nsx Mã Phụ tùng:
Đóng gói:
Reel, Cut Tape, MouseReel
Sẵn có:
Có hàng
Giá:
$1.07
Tối thiểu:
1

Sản phẩm Tương tự

Texas Instruments TPS25200QDRVRQ1
Texas Instruments
Hot Swap Voltage Controllers Auto TPS25200-Q1 5-V eFuse A 595-TPS2520 A 595-TPS25200QDRVTQ1

Đặc tính Sản phẩm Thuộc tính giá trị Chọn thuộc tính
Texas Instruments
Danh mục Sản phẩm: Bộ điều khiển điện áp hoán đổi nóng
RoHS:  
Controllers & Switches
2.7 A
6.5 V
2.5 V
1 Channel
147 uA
- 40 C
+ 125 C
SMD/SMT
WSON-6
AEC-Q100
Reel
Cut Tape
MouseReel
Yes
Nhãn hiệu: Texas Instruments
Quốc gia Hội nghị: PH
Quốc gia phân phối: US
Quốc gia xuất xứ: US
Điện áp đầu vào / nguồn cấp - Tối đa: 6.5 V
Điện áp đầu vào / nguồn cấp - Tối thiểu: 2.5 V
Nhạy với độ ẩm: Yes
Loại sản phẩm: Hot Swap Voltage Controllers
Sê-ri: TPS25200
Số lượng Kiện Gốc: 250
Danh mục phụ: PMIC - Power Management ICs
Đơn vị Khối lượng: 9.500 mg
Đã tìm thấy các sản phẩm:
Để hiển thị sản phẩm tương tự, hãy chọn ít nhất một ô
Chọn ít nhất một hộp kiểm ở trên để hiển thị các sản phẩm tương tự trong danh mục này.
Các thuộc tính đã chọn: 0

Chức năng này cần phải bật JavaScript.

CNHTS:
8542399000
CAHTS:
8542390000
USHTS:
8542390090
JPHTS:
854239099
TARIC:
8542399000
MXHTS:
8542399999
ECCN:
EAR99

TPS25200/TPS25200-Q1 5V eFuse

Texas Instruments TPS25200/TPS25200-Q1 5V eFuse is an eFuse that comes with a precision current limit and overvoltage clamp. The device provides robust protection for load and source during overvoltage and overcurrent events. The TPS25200/TPS25200-Q1 is an intelligent protected load switch with VIN tolerant to 20V. If an incorrect voltage is applied at IN, the output will clamp to 5.4V to protect the load. If the voltage at IN exceeds 7.6V, the device disconnects the load to prevent damage to the device and/or load.

LM5060 High-Side Protection Controllers

Texas Instruments LM5060 High-Side Protection Controllers with Low Quiescent Current offers intelligent control of a high-side N-channel MOSFET during normal on/off transitions and fault conditions. The constant rise time of the output voltage results from the inrush current control. Both an Input UVLO (with hysteresis) and a programmable input OVP are provided, with an enable input offering a remote on or off control. The initial start-up VGS fault detection delay time, the transition VDS fault detection delay time, and the continuous over-current VDS fault detection delay time is programmed from a single capacitor. The MOSFET is latched off until either the enable input, or the UVLO input is toggled low and then high when a detected fault condition persists longer than the allowed fault delay time.