UCC21540DWR

Texas Instruments
595-UCC21540DWR
UCC21540DWR

Nsx:

Mô tả:
Galvanically Isolated Gate Drivers 5.7kVrms 4A/6A dual- channel isolated ga A 595-UCC21540DW

Mô hình ECAD:
Tải xuống Thư viện Tải miễn phí để chuyển đổi tệp tin này cho Công cụ ECAD của bạn. Tìm hiểu thêm về Mô hình ECAD.

Có hàng: 2,091

Tồn kho:
2,091 Có thể Giao hàng Ngay
Thời gian sản xuất của nhà máy:
12 Tuần Thời gian sản xuất tại nhà máy dự kiến để có số lượng lớn hơn mức hiển thị.
Tối thiểu: 1   Nhiều: 1
Đơn giá:
$-.--
Thành tiền:
$-.--
Dự kiến Thuế quan:
Đóng gói:
Toàn bộ Cuộn (Đơn hàng theo bội số của 2000)

Giá (USD)

Số lượng Đơn giá
Thành tiền
Cut Tape / MouseReel™
$2.35 $2.35
$1.75 $17.50
$1.60 $40.00
$1.43 $143.00
$1.35 $337.50
$1.30 $650.00
$1.26 $1,260.00
Toàn bộ Cuộn (Đơn hàng theo bội số của 2000)
$1.22 $2,440.00
$1.17 $4,680.00
† $7.00 Phí MouserReel™ sẽ được thêm và tính vào giỏ hàng của bạn. Không thể hủy và gửi trả tất cả đơn hàng MouseReel™.

Bao bì thay thế

Nsx Mã Phụ tùng:
Đóng gói:
Tube
Sẵn có:
Có hàng
Giá:
$4.48
Tối thiểu:
1

Sản phẩm Tương tự

Texas Instruments UCC21540DW
Texas Instruments
Galvanically Isolated Gate Drivers 5.7kVrms 4A/6A dual- channel isolated gat A 595-UCC21540DWR
Hết hạn sử dụng: Nhà sản xuất đã lên kế hoạch ngừng và sẽ không sản xuất nữa.

Đặc tính Sản phẩm Thuộc tính giá trị Chọn thuộc tính
Texas Instruments
Danh mục Sản phẩm: Bộ điều khiển cổng cách ly điện hóa
RoHS:  
UCC21540
SMD/SMT
SOIC-16
2 Channel
5.7 kV
- 40 C
+ 125 C
950 mW
45 ns
5 ns
6 ns
Reel
Cut Tape
MouseReel
Nhãn hiệu: Texas Instruments
Quốc gia Hội nghị: MY
Quốc gia phân phối: US
Quốc gia xuất xứ: MY
Bộ công cụ phát triển: UCC21540EVM
Loại logic: CMOS, TTL
Nhạy với độ ẩm: Yes
Số mạch điều khiển: 2 Driver
Số lượng đầu ra: 2 Output
Dòng cấp nguồn vận hành: 2.5 mA
Dòng đầu ra: 6 A
Điện áp đầu ra: 14.95 V
Sản phẩm: Isolated Gate Drivers
Loại sản phẩm: Galvanically Isolated Gate Drivers
Tắt: Shutdown
Số lượng Kiện Gốc: 2000
Danh mục phụ: PMIC - Power Management ICs
Điện áp cấp nguồn - Tối đa: 5.5 V
Điện áp cấp nguồn - Tối thiểu: 3 V
Công nghệ: GaN
Loại: Half-Bridge
Đã tìm thấy các sản phẩm:
Để hiển thị sản phẩm tương tự, hãy chọn ít nhất một ô
Chọn ít nhất một hộp kiểm ở trên để hiển thị các sản phẩm tương tự trong danh mục này.
Các thuộc tính đã chọn: 0

Chức năng này cần phải bật JavaScript.

CAHTS:
8542390000
USHTS:
8542390070
MXHTS:
8542399999
ECCN:
EAR99

Motor Control Solutions

Texas Instruments Motor Control Solutions leverage TI's rich history in advanced motor control expertise, combined with TI's analog and embedded processing portfolios, to deliver complete motor system solutions. TI provides a broad motor expertise, a wide breadth of selection, and comprehensive support for efficient, reliable, and cost-effective drive and control solutions.

UCC2154x/UCC2154x-Q1 Dual-Channel Gate Driver

Texas Instruments UCC2154x/UCC2154x-Q1 Dual-Channel Gate Driver is an isolated gate driver designed with up to 4A/6A peak source/sink current to drive power MOSFET, IGBT, and GaN transistors. The UCC21540 in the DWK package also offers 3.3mm minimum channel-to-channel spacing, which facilitates higher bus voltage. The UCC2154x/UCC2154x-Q1 can be configured as two low-side drivers, two high-side drivers, or a half-bridge driver. The input side is isolated from the two output drivers by a 5.7kVRMS isolation barrier, with a minimum of 100V/ns common-mode transient immunity (CMTI).