UCC2891PWR

Texas Instruments
595-UCC2891PWR
UCC2891PWR

Nsx:

Mô tả:
Switching Controllers Current Mode Active Clamp A 595-UCC2891P A 595-UCC2891PW

Mô hình ECAD:
Tải xuống Thư viện Tải miễn phí để chuyển đổi tệp tin này cho Công cụ ECAD của bạn. Tìm hiểu thêm về Mô hình ECAD.

Sẵn có

Tồn kho:
Không Lưu kho
Thời gian sản xuất của nhà máy:
12 Tuần Thời gian sản xuất tại nhà máy dự kiến.
Tối thiểu: 2000   Nhiều: 2000
Đơn giá:
$-.--
Thành tiền:
$-.--
Dự kiến Thuế quan:
Sản phẩm này được Vận chuyển MIỄN PHÍ

Giá (USD)

Số lượng Đơn giá
Thành tiền
Toàn bộ Cuộn (Đơn hàng theo bội số của 2000)
$1.84 $3,680.00
$1.81 $7,240.00

Bao bì thay thế

Nsx Mã Phụ tùng:
Đóng gói:
Tube
Sẵn có:
Có hàng
Giá:
$3.96
Tối thiểu:
1

Sản phẩm Tương tự

Texas Instruments UCC2891PW
Texas Instruments
Switching Controllers Current Mode Active Clamp A 595-UCC2891P A 595-UCC2891PWR

Đặc tính Sản phẩm Thuộc tính giá trị Chọn thuộc tính
Texas Instruments
Danh mục Sản phẩm: Bộ điều khiển chuyển mạch
RoHS:  
Flyback, Forward
1 Output
1 MHz
73 %
2.5 A
- 40 C
+ 85 C
SMD/SMT
TSSOP-16
Reel
Nhãn hiệu: Texas Instruments
Quốc gia Hội nghị: Not Available
Quốc gia phân phối: Not Available
Quốc gia xuất xứ: MY
Bộ công cụ phát triển: UCC2891EVM
Thời gian giảm: 14 ns
Điện áp cấp vận hành: 12 V
Loại sản phẩm: Switching Controllers
Thời gian tăng: 19 ns
Sê-ri: UCC2891
Số lượng Kiện Gốc: 2000
Danh mục phụ: PMIC - Power Management ICs
Đơn vị Khối lượng: 62 mg
Đã tìm thấy các sản phẩm:
Để hiển thị sản phẩm tương tự, hãy chọn ít nhất một ô
Chọn ít nhất một hộp kiểm ở trên để hiển thị các sản phẩm tương tự trong danh mục này.
Các thuộc tính đã chọn: 0

Chức năng này cần phải bật JavaScript.

CNHTS:
8542319000
CAHTS:
8542390000
USHTS:
8542310030
JPHTS:
8542390990
TARIC:
8542399000
MXHTS:
85423999
ECCN:
EAR99

UCC2891x High-Voltage Flyback Switcher

Texas Instruments UCC2891x High-Voltage Flyback Switcher is dedicated to isolated flyback power supplies and provides output voltage and current regulation without the use of an optical coupler. The device incorporates a 700V power FET and a controller that processes operating information from the auxiliary flyback winding and from the power FET to provide precise output voltage and current control. The integrated high-voltage current source for a startup that is switched off during device operation and the controller current consumption that is dynamically adjusted allows very low standby power. Control algorithms in the Texas Instruments UCC2891x, combining switching frequency and peak primary current modulation, allow operating efficiencies to meet or exceed applicable standards. Discontinuous conduction mode (DCM) with valley switching is used to reduce switching losses. The maximum switching frequency is 115kHz. Protection features help to keep secondary and primary component stress levels in check across the operating range.