XTR112U

Texas Instruments
595-XTR112U
XTR112U

Nsx:

Mô tả:
Sensor Interface 4-20mA Crnt Trnsmtr w/Sensor Exc & Lin

Bảng dữ liệu:
Mô hình ECAD:
Tải xuống Thư viện Tải miễn phí để chuyển đổi tệp tin này cho Công cụ ECAD của bạn. Tìm hiểu thêm về Mô hình ECAD.

Có hàng: 27

Tồn kho:
27 Có thể Giao hàng Ngay
Thời gian sản xuất của nhà máy:
18 Tuần Thời gian sản xuất tại nhà máy dự kiến để có số lượng lớn hơn mức hiển thị.
Tối thiểu: 1   Nhiều: 1
Đơn giá:
$-.--
Thành tiền:
$-.--
Dự kiến Thuế quan:

Giá (USD)

Số lượng Đơn giá
Thành tiền
$15.47 $15.47
$12.25 $122.50
$10.95 $547.50
$10.55 $1,055.00
$10.13 $2,532.50
$9.87 $4,935.00
$9.66 $9,660.00

Đặc tính Sản phẩm Thuộc tính giá trị Chọn thuộc tính
Texas Instruments
Danh mục Sản phẩm: Giao diện cảm biến
RoHS:  
Current Transmitter
2-Wire
36 V
7.5 V
- 40 C
+ 85 C
SMD/SMT
SOIC-14
Tube
Nhãn hiệu: Texas Instruments
Quốc gia Hội nghị: Not Available
Quốc gia phân phối: Not Available
Quốc gia xuất xứ: MY
Dòng đầu vào: 250 uA
Loại đầu vào: Voltage
Điện áp đầu vào: 1.25 V to 3.5 V
Nhạy với độ ẩm: Yes
Điện áp cấp vận hành: 24 V
Dòng đầu ra: 20 mA
Loại đầu ra: Current, Voltage
Loại sản phẩm: Sensor Interface
Sê-ri: XTR112
Số lượng Kiện Gốc: 50
Danh mục phụ: Interface ICs
Đơn vị Khối lượng: 129.400 mg
Đã tìm thấy các sản phẩm:
Để hiển thị sản phẩm tương tự, hãy chọn ít nhất một ô
Chọn ít nhất một hộp kiểm ở trên để hiển thị các sản phẩm tương tự trong danh mục này.
Các thuộc tính đã chọn: 0

Chức năng này cần phải bật JavaScript.

CNHTS:
8542319090
CAHTS:
8542390000
USHTS:
8542390090
JPHTS:
8542390990
MXHTS:
8542399999
ECCN:
EAR99

XTR112 & XTR114 4-20mA Current Transmitters

Texas Instruments XTR112 and XTR114 monolithic 4-20mA, two-wire current transmitters provide complete current excitation for high impedance platinum RTD temperature sensors and bridges, instrumentation amplifiers, and current output circuitry on a single IC. TI XTR112 has two 250mA current sources while the XTR114 has two 100mA sources for RTD excitation. Versatile linearization circuitry provides a 2nd-order correction to the RTD, typically achieving a 40:1 improvement in linearity. Instrumentation amplifier gain can be configured for a wide range of temperature or pressure measurements. Total unadjusted error of the complete current transmitter is low enough to permit use without adjustment in many applications. This includes zero output current drift, span drift and nonlinearity. TI XTR112 and XTR114 4-20mA current transmitters operate on loop power supply voltages down to 7.5V.