PFTRCS-5.0-1.0

PEM
153-PFTRCS-5.0-1.0
PFTRCS-5.0-1.0

Nsx:

Mô tả:
Screws & Fasteners SELF CLINCHING ROLLER BEARING FASTENER 5.0 DIA 1.0 THICKNESS

Tuổi thọ:
Sản phẩm Mới:
Mới từ nhà sản xuất này.
Mô hình ECAD:
Tải xuống Thư viện Tải miễn phí để chuyển đổi tệp tin này cho Công cụ ECAD của bạn. Tìm hiểu thêm về Mô hình ECAD.

Có hàng: 689

Tồn kho:
689 Có thể Giao hàng Ngay
Thời gian sản xuất của nhà máy:
20 Tuần Thời gian sản xuất tại nhà máy dự kiến để có số lượng lớn hơn mức hiển thị.
Tối thiểu: 1   Nhiều: 1
Đơn giá:
$-.--
Thành tiền:
$-.--
Dự kiến Thuế quan:

Giá (USD)

Số lượng Đơn giá
Thành tiền
$1.29 $1.29
$0.968 $9.68
$0.753 $75.30
$0.71 $355.00
$0.695 $695.00
$0.672 $1,344.00
$0.648 $3,240.00
$0.625 $6,250.00
25,000 Báo giá

Đặc tính Sản phẩm Thuộc tính giá trị Chọn thuộc tính
PEM
Danh mục Sản phẩm: Vít & Nẹp giữ
RoHS:  
Fasteners
Roller Bearing Fastener
4.5 mm
Nhãn hiệu: PEM
Quốc gia Hội nghị: Not Available
Quốc gia phân phối: Not Available
Quốc gia xuất xứ: US
Kích thước lỗ gắn: 3.3 mm
Đường kính ngoài: 5 mm
Loại sản phẩm: Screws & Fasteners
Sê-ri: PFTRCS
Số lượng Kiện Gốc: 1000
Danh mục phụ: Hardware
Thương hiệu: PFTRC
Đã tìm thấy các sản phẩm:
Để hiển thị sản phẩm tương tự, hãy chọn ít nhất một ô
Chọn ít nhất một hộp kiểm ở trên để hiển thị các sản phẩm tương tự trong danh mục này.
Các thuộc tính đã chọn: 0

CAHTS:
7318290000
USHTS:
7318290000
JPHTS:
731829000
KRHTS:
7318290000
TARIC:
7318290090
MXHTS:
7318299999
BRHTS:
73182900
ECCN:
EAR99

PFTR™ Roller Bearing Fasteners

PEM PFTR™ Roller Bearing Fasteners are low-friction rollers that can replace the high-friction of simple slide shelves, obviating the need for expensive sliding-rail assemblies. These low-profile bearings can be captivated with either a clinch or flare, resulting in a cost-effective tray slide technique. The PFTR™ roller bearing fasteners offer simple installation and ease of design in limited-footprint-spacing applications while eliminating the need for any oil lubricants or loose hardware. These roller bearing fasteners support loads while guiding and positioning components and are easily installed into pre-punched or drilled holes in sheets as thin as 0.040”/1mm.