QPF4005TR7

Qorvo
772-QPF4005TR7
QPF4005TR7

Nsx:

Mô tả:
RF Front End 39GHz FEM for 5G

Mô hình ECAD:
Tải xuống Thư viện Tải miễn phí để chuyển đổi tệp tin này cho Công cụ ECAD của bạn. Tìm hiểu thêm về Mô hình ECAD.

Sẵn có

Tồn kho:
Không Lưu kho
Thời gian sản xuất của nhà máy:
Tối thiểu: 500   Nhiều: 500
Đơn giá:
$-.--
Thành tiền:
$-.--
Dự kiến Thuế quan:
Sản phẩm này được Vận chuyển MIỄN PHÍ

Giá (USD)

Số lượng Đơn giá
Thành tiền
Toàn bộ Cuộn (Đơn hàng theo bội số của 500)
$232.63 $116,315.00

Bao bì thay thế

Nsx Mã Phụ tùng:
Đóng gói:
Reel, Cut Tape
Sẵn có:
Có hàng
Giá:
$377.05
Tối thiểu:
1

Đặc tính Sản phẩm Thuộc tính giá trị Chọn thuộc tính
Qorvo
Danh mục Sản phẩm: Bộ tiền xử lý RF
RoHS:  
RF Front End
37 GHz to 40.5 GHz
4.2 dB
20 V
+ 95 C
SMD/SMT
Reel
Nhãn hiệu: Qorvo
Quốc gia Hội nghị: Not Available
Quốc gia phân phối: Not Available
Quốc gia xuất xứ: US
Bộ công cụ phát triển: QPF4005EVB03
Độ khuếch đại: 18 dB, 23 dB
Nhiệt độ làm việc tối thiểu: - 40 C
Nhạy với độ ẩm: Yes
Loại sản phẩm: RF Front End
Sê-ri: QPF4005
Số lượng Kiện Gốc: 500
Danh mục phụ: Wireless & RF Integrated Circuits
Công nghệ: GaN SiC
Mã Bí danh: QPF4005
Đã tìm thấy các sản phẩm:
Để hiển thị sản phẩm tương tự, hãy chọn ít nhất một ô
Chọn ít nhất một hộp kiểm ở trên để hiển thị các sản phẩm tương tự trong danh mục này.
Các thuộc tính đã chọn: 0

Chức năng này cần phải bật JavaScript.

USHTS:
8517620090
ECCN:
EAR99

QPF4005 Dual Channel Front End Module

Qorvo QPF4005 Dual Channel Front End Module is a multifunction Gallium Nitride MMIC front-end module targeted for 39GHz phased array 5G base stations and terminals. The QPF4005 combines a low-noise amplifier, a low-insertion-loss high-isolation TR switch, and a high-gain high-efficiency multistage PA. The QPF4005 operates from 37GHz to 40.5GHz range. The receive path (LNA + T/R SW) is designed to provide 15dB of gain and a noise figure less than 4.5dB. The Qorvo QPF4005 Dual Channel Front End Module transmit path (PA + T/R SW) provides 18dB of small signal gain and a saturated output power of 2W for each channel.

Solutions for mmW 5G

Qorvo Solutions for mmW 5G offer higher frequency mmW bands to expand network capacity and wireless use applications. These mmW bands operate over a significantly shorter range than lower frequency bands. This drives a significant increase in residential and commercial placements of short-range, smaller cell sites. Qorvo has over a decade of experience supporting mmW applications and solutions. Qorvo combines mmW systems expertise and the industry’s most comprehensive high-power RF product and technology portfolio.