Marki Microwave Công cụ phát triển RF

Kết quả: 370
Chọn Hình ảnh Số Phụ tùng Nsx Mô tả Bảng dữ liệu Sẵn có Giá (USD) Lọc kết quả trong bảng theo đơn giá dựa trên số lượng của bạn. Số lượng RoHS
Marki Microwave RF Development Tools The EVAL-MT3H-0113L is a connectorized evaluation board for the MT3H-0113LSM passive MMIC Surface mount 1.5 - 13 GHz High Dynamic Range Mixer. Thời gian giao Sản phẩm không Lưu kho 2 Tuần
Tối thiểu: 1
Nhiều: 1

Marki Microwave RF Development Tools The EVAL-NLTL-6273 is a connectorized evaluation board for the NLTL-6273SM is a MMIC 0.7-5 GHz non-linear transmission line (NLTL) based comb generator. Thời gian giao Sản phẩm không Lưu kho 2 Tuần
Tối thiểu: 1
Nhiều: 1

Marki Microwave RF Development Tools The EVAL-NLTL-6794 is a connectorized evaluation board for the NLTL-6794SM is a MMIC 0.1-1 GHz non-linear transmission line (NLTL) based comb generator. Thời gian giao Sản phẩm không Lưu kho 2 Tuần
Tối thiểu: 1
Nhiều: 1

Marki Microwave RF Development Tools The EVAL-NLTL-6796 is a connectorized evaluation board for the NLTL-6796SM is a MMIC 0.5-3.5 GHz non-linear transmission line (NLTL) based comb generator. Thời gian giao Sản phẩm không Lưu kho 2 Tuần
Tối thiểu: 1
Nhiều: 1

Marki Microwave RF Development Tools The EVAL-PBR-0003 is a connectorized evaluation board for the PBR-0003SMG surface mount 10 MHz to 3 GHz high isolation power divider. Thời gian giao Sản phẩm không Lưu kho 2 Tuần
Tối thiểu: 1
Nhiều: 1

Marki Microwave RF Development Tools The EVAL-PBR-0006 is a connectorized evaluation board for the PBR-0006SMG surface mount 10 MHz to 6 GHz high isolation power divider. Thời gian giao Sản phẩm không Lưu kho 2 Tuần
Tối thiểu: 1
Nhiều: 1

Marki Microwave RF Development Tools The EVAL-PBR-0012 is a connectorized evaluation board for the PBR-0012SMG surface mount 10 MHz to 3 GHz high isolation power divider. Thời gian giao Sản phẩm không Lưu kho 2 Tuần
Tối thiểu: 1
Nhiều: 1


Marki Microwave RF Development Tools This is the evaluation board for the ABDS-10170PSM - a GaAs active MMIC balun in a 3mm QFN surface mount package. Its frequency ranges from DC to 30 GHz and offers 9 dB differential to single ended gain (low end limited by DC block). Thời gian giao Sản phẩm không Lưu kho 2 Tuần
Tối thiểu: 1
Nhiều: 1


Marki Microwave RF Development Tools This is the evaluation board for the ABSD-10169PSM - a GaAs active MMIC balun in a 3mm QFN surface mount package. Its frequency ranges from DC to 30 GHz and offers 9 dB single ended to differential gain (low end limited by DC block). Thời gian giao Sản phẩm không Lưu kho 2 Tuần
Tối thiểu: 1
Nhiều: 1

Marki Microwave RF Development Tools The EVB-AKA-1300P is a connectorized evaluation board for the AKA-1300PSM is a low-cost, cascadable broadband InGaP HBT amplifier. Thời gian giao Sản phẩm không Lưu kho 2 Tuần
Tối thiểu: 1
Nhiều: 1

Marki Microwave RF Development Tools The EVB-AKA-1310P is a connectorized evaluation board for the AKA-1310PSM is a low-cost, cascadable broadband InGaP HBT amplifier. Thời gian giao Sản phẩm không Lưu kho 2 Tuần
Tối thiểu: 1
Nhiều: 1

Marki Microwave RF Development Tools The EVB-AKA-1400P is a connectorized evaluation board for the AKA-1400PSM Broadband InGaP SMT surface mount DC 14 GHz Amplifier. Thời gian giao Sản phẩm không Lưu kho 2 Tuần
Tối thiểu: 1
Nhiều: 1

Marki Microwave RF Development Tools The EVB-AKA-1500P is a connectorized evaluation board for the AKA-1500PSM Broadband InGaP SMT surface mount DC 14 GHz Amplifier. Thời gian giao Sản phẩm không Lưu kho 2 Tuần
Tối thiểu: 1
Nhiều: 1


Marki Microwave RF Development Tools This is the evaluation board for the AMM-10202PSM. The AMM-10202PSM is a surface-mount LO driver amplifier that is designed to provide sufficient LO drive for an H or S diode mixer.
Thời gian giao Sản phẩm không Lưu kho 2 Tuần
Tối thiểu: 1
Nhiều: 1


Marki Microwave RF Development Tools This is the evaluation board for the AMM-10220PSM. The AMM-10220PSM is a surface-mount amplifier suitable for use as a single tone driver or general-purpose gain block. It can drive an L or H diode mixer from 2 to 26 GHz. Thời gian giao Sản phẩm không Lưu kho 2 Tuần
Tối thiểu: 1
Nhiều: 1

Marki Microwave RF Development Tools The EVB-AMM-7473P is a connectorized evaluation board for the AMM-7473PSM 0.4-27 GHz surface mount amplifier. Thời gian giao Sản phẩm không Lưu kho 2 Tuần
Tối thiểu: 1
Nhiều: 1

Marki Microwave RF Development Tools The EVB-AMM-8211P is a connectorized evaluation board for the AMM-8211PSM surface mount 22-57 GHz GaAs LO driver amplifier Thời gian giao Sản phẩm không Lưu kho 2 Tuần
Tối thiểu: 1
Nhiều: 1


Marki Microwave RF Development Tools This is the evaluation board for the AMM-9619PSM. The AMM-9619PSM is a surface-mount amplifier suitable for use as a single tone driver or general-purpose gain block. It can drive an L or H diode mixer from 2 to 26 GHz. Thời gian giao Sản phẩm không Lưu kho 2 Tuần
Tối thiểu: 1
Nhiều: 1


Marki Microwave RF Development Tools This is the evaluation board for the AMM-9853PSM. This version is designed to be used with external bias tees. The AMM-9853PSM is a surface-mount amplifier suitable for use as a single tone driver or general-purpose gain block. Thời gian giao Sản phẩm không Lưu kho 2 Tuần
Tối thiểu: 1
Nhiều: 1


Marki Microwave RF Development Tools This is the evaluation board for the AMM-9854PSM. This version is designed to be used with external bias tees. The AMM-9854PSM is a surface-mount amplifier suitable for use as a single tone driver or general-purpose gain block. Thời gian giao Sản phẩm không Lưu kho 2 Tuần
Tối thiểu: 1
Nhiều: 1


Marki Microwave RF Development Tools This is the evaluation board for the AMM-9855PSM. This version is designed to be used with external bias tees. The AMM-9855PSM is a surface-mount amplifier suitable for use as a single tone driver or general-purpose gain block. Thời gian giao Sản phẩm không Lưu kho 2 Tuần
Tối thiểu: 1
Nhiều: 1


Marki Microwave RF Development Tools This is the evaluation board for the AMM-9858PSM. The AMM-9858PSM is a wideband low noise amplifier capable of providing 17 dB gain and +30 dBm OIP3 with a low 1.9 dB typical noise figure. Thời gian giao Sản phẩm không Lưu kho 2 Tuần
Tối thiểu: 1
Nhiều: 1


Marki Microwave RF Development Tools This is the evaluation board for the AMM-9859PSM. The AMM-9859PSM is a wideband low noise amplifier capable of providing 15 dB gain and +28 dBm OIP3 with a low 1.9 dB typical noise figure. Thời gian giao Sản phẩm không Lưu kho 2 Tuần
Tối thiểu: 1
Nhiều: 1

Marki Microwave RF Development Tools This is the evaluation board for the AMM-9860PSM. The AMM-9860PSM is a wideband low noise amplifier capable of providing 13.5 dB gain and +28 dBm OIP3 with a low 2.7 dB typical noise figure. Thời gian giao Sản phẩm không Lưu kho 2 Tuần
Tối thiểu: 1
Nhiều: 1


Marki Microwave RF Development Tools This is the evaluation board for the AMM-9861PSM. The AMM-9861PSM is a wideband low noise amplifier capable of providing 11.7 dB gain and +24 dBm OIP3 with a low 2.5 dB typical noise figure. Thời gian giao Sản phẩm không Lưu kho 2 Tuần
Tối thiểu: 1
Nhiều: 1