Q4XTKLAF300-Q8

Banner Engineering
778-Q4XTKLAF300-Q8
Q4XTKLAF300-Q8

Nsx:

Mô tả:
Photoelectric Sensors Q4X Series: Laser Adjustable Field; Range: 300 mm; Input: 10-30 V dc; Output: 1 PNP/NPN with IO-Link Communication; 1 PNP; 4-pin M12 Integral QD

Mô hình ECAD:
Tải xuống Thư viện Tải miễn phí để chuyển đổi tệp tin này cho Công cụ ECAD của bạn. Tìm hiểu thêm về Mô hình ECAD.

Có hàng: 8

Tồn kho:
8 Có thể Giao hàng Ngay
Thời gian sản xuất của nhà máy:
4 Tuần Thời gian sản xuất tại nhà máy dự kiến để có số lượng lớn hơn mức hiển thị.
Tối thiểu: 1   Nhiều: 1
Đơn giá:
$-.--
Thành tiền:
$-.--
Dự kiến Thuế quan:
Sản phẩm này được Vận chuyển MIỄN PHÍ

Giá (USD)

Số lượng Đơn giá
Thành tiền
$502.98 $502.98

Đặc tính Sản phẩm Thuộc tính giá trị Chọn thuộc tính
Banner Engineering
Danh mục Sản phẩm: Cảm biến quang điện
Background Suppression, Foreground Suppression
300 mm
Red Laser
PNP/NPN
Connector
M12
4 Pin
10 VDC
30 VDC
- 10 C
+ 50 C
Nhãn hiệu: Banner Engineering
Quốc gia Hội nghị: Not Available
Quốc gia phân phối: Not Available
Quốc gia xuất xứ: US
Chỉ số IP: IP67, IP68, IP69K
Điện áp cấp vận hành: 10 VDC to 30 VDC
Loại sản phẩm: Photoelectric Sensors
Sê-ri: Q4X
Số lượng Kiện Gốc: 1
Danh mục phụ: Sensors
Mã Bí danh: 95301
Đã tìm thấy các sản phẩm:
Để hiển thị sản phẩm tương tự, hãy chọn ít nhất một ô
Chọn ít nhất một hộp kiểm ở trên để hiển thị các sản phẩm tương tự trong danh mục này.
Các thuộc tính đã chọn: 0

CAHTS:
8541490020
USHTS:
8541498000
JPHTS:
854149000
TARIC:
8541490000
MXHTS:
8541499900
BRHTS:
85414900
ECCN:
EAR99

Laser Distance Measurement Sensors

Banner Engineering Laser Distance Measurement Sensors offer the alignment advantages of a visible sensing beam, extended range, and precise detection capabilities. These sensors are available in various discrete, analog, and IO-Link sensing applications. Banner Engineering Laser Distance Measurement Sensors include powerful problem-solving, high-precision, and long-range sensors.

Q4X Series Photoelectric Sensors

Banner Engineering Q4X Series Photoelectric Sensors are Class I laser CMOS measuring sensors that offer a 0 to 10V output rating to represent the distance measured. These sensors feature an output indicator, display, and buttons. When the sensor is in Run mode, the display shows the current measurement reading or the corresponding analog output value. The Q4X sensors reliably detect submillimeter distance changes and provide the continuous measurement of challenging targets from dark to reflective, out to 500mm or 310mm, depending on the model. Banner Engineering Q4X Series Photoelectric Sensors resist mechanical impact, over-tightening, and extreme vibration.