APX803L20-41SA-7

Diodes Incorporated
621-APX803L20-41SA-7
APX803L20-41SA-7

Nsx:

Mô tả:
Supervisory Circuits 4.1V, 220ms Reset Generator

Mô hình ECAD:
Tải xuống Thư viện Tải miễn phí để chuyển đổi tệp tin này cho Công cụ ECAD của bạn. Tìm hiểu thêm về Mô hình ECAD.

Có hàng: 2,959

Tồn kho:
2,959 Có thể Giao hàng Ngay
Thời gian sản xuất của nhà máy:
40 Tuần Thời gian sản xuất tại nhà máy dự kiến để có số lượng lớn hơn mức hiển thị.
Thời gian giao hàng lâu được báo cáo trên sản phẩm này.
Tối thiểu: 1   Nhiều: 1
Đơn giá:
$-.--
Thành tiền:
$-.--
Dự kiến Thuế quan:
Đóng gói:
Toàn bộ Cuộn (Đơn hàng theo bội số của 3000)

Giá (USD)

Số lượng Đơn giá
Thành tiền
Cut Tape / MouseReel™
$0.24 $0.24
$0.164 $1.64
$0.146 $3.65
$0.125 $12.50
$0.115 $28.75
$0.109 $54.50
$0.104 $104.00
Toàn bộ Cuộn (Đơn hàng theo bội số của 3000)
$0.097 $291.00
† $7.00 Phí MouserReel™ sẽ được thêm và tính vào giỏ hàng của bạn. Không thể hủy và gửi trả tất cả đơn hàng MouseReel™.

Đặc tính Sản phẩm Thuộc tính giá trị Chọn thuộc tính
Diodes Incorporated
Danh mục Sản phẩm: Mạch giám sát
RoHS:  
Voltage Detector
SMD/SMT
SOT-23-3
4.1 V
1 Input
Active Low, Open Drain
No Manual Reset
No Watchdog
No Backup
220 ms
5.5 V
- 40 C
+ 150 C
1.5 %
APX803L
Reel
Cut Tape
MouseReel
Nhãn hiệu: Diodes Incorporated
Tín hiệu hỗ trợ chip: No Chip Enable
Quốc gia Hội nghị: Not Available
Quốc gia phân phối: Not Available
Quốc gia xuất xứ: CN
Nhạy với độ ẩm: Yes
Dòng cấp nguồn vận hành: 1 uA
Phát hiện lỗi nguồn: No
Loại sản phẩm: Supervisory Circuits
Số lượng Kiện Gốc: 3000
Danh mục phụ: PMIC - Power Management ICs
Điện áp cấp nguồn - Tối thiểu: 900 mV
Đơn vị Khối lượng: 8 mg
Đã tìm thấy các sản phẩm:
Để hiển thị sản phẩm tương tự, hãy chọn ít nhất một ô
Chọn ít nhất một hộp kiểm ở trên để hiển thị các sản phẩm tương tự trong danh mục này.
Các thuộc tính đã chọn: 0

CNHTS:
8542399000
CAHTS:
8542390000
USHTS:
8542390090
TARIC:
8542399000
MXHTS:
8542399999
ECCN:
EAR99

APX803L Micro Power Voltage Detectors

Diodes Incorporated APX803L Micro Power Voltage Detectors are designed for monitoring the power supplies in microprocessors (μP), μC, and digital systems. The APX803L requires a low supply current of only 1.0μA which minimizes the operating current, improving system efficiency on portable, battery-powered devices. High threshold voltage accuracy of +1.5% on the device allows precise VCC reset thresholds. The device circuits perform supervisory functions by sending out a reset signal when the monitored VCC level falls below the chosen threshold voltage level. The reset signal will remain until VCC recovers to a level higher than the threshold voltage, completing the cycle. Another benefit provided is an open-drain output with an active-low output pin that features several delay time options (0ms, 55ms, 220ms, and 450ms) as needed by the system. The packages of 3-pin SOT23, SOT323, SC59, SOT25, and two-pin variants are available on the APX803L Voltage Detectors.